Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 6 Sensor Type) › from 2016.11
RM3160E _56 Audio / Visual / Telematics _019702 PARK ASSIST / MONITORING _0297894 TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 6 Sensor Type) T

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 6 Sensor Type)  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.

·

When an open circuit or frozen indication is displayed by the self-check function, check for DTCs and troubleshoot according to each inspection procedure.



General
Symptom Suspected Area Link
System does not operate at all Proceed to "Clearance Warning ECU Power Source Circuit" Click here
Proceed to "Clearance Sonar Main Switch Circuit" Click here
System cannot be turned off Proceed to "Clearance Sonar Main Switch Circuit" Click here

Sonar Function
Symptom Suspected Area Link
Combination meter assembly (shift position indicator) operates normally, but detection operates when shift lever is in P, or detection does not operate when shift lever is in any position other than P (front sonar) CAN communication system Click here
Clearance warning ECU assembly Click here
Combination meter assembly (shift position indicator) operates normally, but detection operates when shift lever is in any position other than R, or does not operate with shift lever in R (rear sonar) CAN communication system Click here
Clearance warning ECU assembly Click here
Combination meter assembly (speedometer) operates normally, but detection does not operate when vehicle speed meets operation condition, or detection operates when vehicle speed does not meet operation condition (front sonar) CAN communication system Click here
Clearance warning ECU assembly Click here

Buzzer Function
Symptom Suspected Area Link
Sonar detection operation is normal but buzzer does not sound Check that the temporary mute function is not in operation -
Proceed to "Clearance Warning Buzzer Circuit" Click here
Clearance warning ECU assembly Click here

Display Function
Symptom Suspected Area Link
Detection operation is normal but clearance sonar indicator does not illuminate CAN communication system Click here
Combination meter assembly (LED): Perform Active Test (Indicat. Clearance Sonar LCD) Click here
Combination meter assembly Click here
Clearance warning ECU assembly Click here
Detection operation is normal but all sonar displays do not appear on multi-information display and multi-display CAN communication system Click here
Clearance warning ECU assembly Click here
Detection operation is normal but sonar displays do not appear on multi-information display CAN communication system Click here
Combination meter assembly Click here
Clearance warning ECU assembly Click here
Detection operation is normal but sonar displays do not appear on multi-display CAN communication system Click here
Navigation Receiver Assembly*1 Click here
Radio and Display Receiver Assembly*2 Click here
Clearance warning ECU assembly Click here

*1: for Navigation Receiver Type

*2: for Radio and Display Type