Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Power Seat) › 2020.11–2021.10
RM37A0E _58 Vehicle Interior _086894 SEAT _0416490 FRONT SEAT ASSEMBLY(for Power Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:
B543257

Wear protective gloves. Sharp areas on the parts may injure your hands.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The following procedure is for LHD vehicles.

·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 89710 1.REMOVE POSITION CONTROL ECU ASSEMBLY (w/ Seat Position Memory System)

Hide 87501B 2.REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

Hide 73240 3.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

Hide 73230 4.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

Hide 71074S 5.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER

a.
B439715

Disconnect the rubber band of the separate type front seatback cover.


Hide 71868N 6.REMOVE FRONT SEAT FRONT CUSHION SHIELD

a.
B564724

Remove the clip.


b.
B564725C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the guide as shown in the illustration.


c.
B564726C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 claws as shown in the illustration.


d.
B564727

Disengage the 3 guides to remove the front seat front cushion shield.


Hide 71812D 7.REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)

a.
B564736

Disengage the 2 claws and 2 guides.


b.
B564735

Disengage the 2 claws.


c.
B564737C01
1.521,2.5 2.208,2.5 true 2.198,2.406 2.406,2.594 0.208,0.188 10 true *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped with protective tape, disengage the claw and slightly pull the front seat cushion shield as shown in the illustration.


d.
B564738C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the guide as shown in the illustration.


e.
B564739

Disconnect the front power seat switch connector to remove the front seat cushion shield.


Hide 71862 8.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)

a.
B564741C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 claws and 2 guides as shown in the illustration.


b.
B564740

Disengage the 2 claws to remove the front seat inner cushion shield.


Hide 71811D 9.REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)

a.
B564729

Disengage the 2 claws and 2 guides.


b.
B564728

Disengage the 3 claws.


c.
B564730C01
1.885,2.563 2.365,2.563 true 2.365,2.479 2.573,2.646 0.208,0.167 10 true *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped with protective tape, disengage the claw and slightly pull the front seat cushion shield as shown in the illustration.


d.
B564731C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the guide as shown in the illustration.


e.
B564732

Disconnect the front power seat switch connector to remove the front seat cushion shield.


Hide 71861 10.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)

a.
B564734C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 claws and 2 guides as shown in the illustration.


b.
B564733

Disengage the 3 claws to remove the front seat inner cushion shield.


Hide 84921B 11.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

a.
B564742

Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.


Hide 84921A 12.REMOVE RECLINING POWER SEAT SWITCH KNOB

a.
B564743

Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.


Hide 72714 13.REMOVE SEAT ADJUSTER SHIELD CLAMP BRACKET (for Driver Side)

a.
B564744

Remove the 2 screws and seat adjuster shield clamp bracket from the front seat cushion shield.


Hide 84922C 14.REMOVE FRONT POWER SEAT SWITCH

Hide 15.REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY

a.
B564745

Disengage the 2 hooks.


b.

for Driver Side:

i.
B471098

Disengage the claw and 4 clamps to separate the front seat airbag assembly wire harness.

HINT:

Disengage the 4 clamps first.




c.

for Front Passenger Side:

i.
B492236

Disengage the claw and 4 clamps to separate the front seat airbag assembly wire harness.

HINT:

Disengage the 4 clamps first.




d.
B471088

Disconnect the connector.


e.

Disengage the clamp.


f.

w/ Seat Heater System:

i.
B485456

Disengage the clamp.


ii.

Disconnect the connector.



g.
B564746

Remove the 4 bolts.


h.

Disengage the 4 guides to remove the separate type front seatback assembly from the separate type front seat cushion assembly.


Hide 71930A 16.REMOVE FRONT SEAT HEADREST SUPPORT ASSEMBLY

a.
B558455

Disengage the 3 hooks.


b.

w/ Seat Heater System:

i.
B526543

Disengage the clamp.



c.
B429321

Open the 2 fasteners.


d.
B471082

Disengage the 4 claws and remove the 2 front seat headrest support assemblies.


Hide 17.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

a.

Remove the separate type front seatback cover with pad.


Hide 71074S 18.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.

Using a screwdriver, disengage the 9 claws and remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.

B471090C01
1.583,2.49 2.052,2.49 false 2.094,2.385 2.406,2.542 0.313,0.156 10 false *a
*a Screwdriver - -



Hide 87510N 19.REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

Hide 85867A 21.REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System (w/ Lumbar Support))

a.
B564747C01
3.063,1.5 3.063,1.333 3.063,1.333 2.833,1.104 true 0.75,1.531 0.75,1.115 true 2.896,1.885 2.896,1.719 2.896,1.719 2.656,1.51 true 0.667,1.531 0.979,1.729 0.313,0.198 10 false *b 3.01,1.531 3.323,1.729 0.313,0.198 10 false *b 2.833,1.896 3.146,2.094 0.313,0.198 10 false *a
*a Wire Harness Clamp
*b Hook


Disengage the wire harness clamp and disconnect the connector.


b.

Disengage the 2 claws and 2 hooks and remove the seatback climate control blower.


Hide 72760D 22.REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (w/ Lumbar Support)

Hide 8219B 23.REMOVE FRONT SEAT NO. 2 WIRE (for Driver Side)

a.
B564967

Disengage the 2 clamps to remove the front seat No. 2 wire.


Hide 8219A 24.REMOVE FRONT SEAT NO. 2 WIRE (for Front Passenger Side)

a.

w/ Climate Control Seat System:

i.

Disengage the clamp (A) and disconnect the connector (B).

B596515C01
2.281,1.458 2.281,2.281 true 1.135,1.979 1.135,2.385 true 1.146,2.021 1.698,2.021 true 5.958,1.365 6.594,1.365 true 6.031,1.979 6.031,2.406 true 5.479,2.021 6.031,2.021 true 0.094,0.083 0.417,0.365 0.323,0.281 12 false *A 3.583,0.083 3.906,0.323 0.323,0.24 12 false *B 2.24,2.292 2.396,2.49 0.156,0.198 10 false A 1.094,2.396 1.25,2.594 0.156,0.198 10 false C 2.542,0.688 2.698,0.885 0.156,0.198 10 true B 2.635,1.292 2.792,1.49 0.156,0.198 10 true D 4.396,1.302 4.552,1.5 0.156,0.198 10 true D 6.635,1.281 6.792,1.479 0.156,0.198 10 false A 6.135,0.667 6.292,0.865 0.156,0.198 10 true B 5.99,2.427 6.146,2.625 0.156,0.198 10 false C
*A for RHD *B for LHD




b.

Disengage the 2 clamps (C) and disconnect the connector (D) to remove the front seat No. 2 wire.


Hide 71054S 25.REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY (w/o Lumbar Support)

a.
B564941

Disengage the 2 claws to separate the 2 front No. 2 seatback edge protectors from the front seatback frame sub-assembly.


b.
B564942C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the front seatback spring sub-assembly from the front seatback frame sub-assembly as shown in the illustration.


c.

w/ Seatback Felt:

i.

Remove the seatback felt from the front seatback spring sub-assembly.



Hide 71588 26.REMOVE FRONT NO. 2 SEATBACK EDGE PROTECTOR

a.

w/o Lumbar Support:

i.

Remove the 2 front No. 2 seatback edge protectors from the front seatback spring sub-assembly.



b.

w/ Lumbar Support:

i.

Remove the 2 front No. 2 seatback edge protectors from the lumbar support adjuster assembly.



Hide 71759D 27.REMOVE FRONT NO. 2 SEATBACK HOOK

a.
B429312

Remove the 2 front No. 2 seatback hooks from the front seatback frame sub-assembly.


Hide 28.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

a.

for Front Passenger Side:

i.
B477936C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claw to separate the connector holder as shown in the illustration.



b.

w/ Seat Heater System:

i.
B526547

Disconnect the connector.


ii.

Disengage the clamp.



c.

Disengage the 10 hooks and remove the separate type front seat cushion cover with pad from the separate type front seat cushion spring assembly.

B526548


Hide 71072S 29.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a.

Using a screwdriver, disengage the 14 claws and remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.

B471092C01
1.563,2.479 1.927,2.479 false 1.969,2.375 2.281,2.531 0.313,0.156 10 false *a
*a Screwdriver - -



Hide 87510L 30.REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

Hide 85860A 31.REMOVE SEAT CUSHION CLIMATE CONTROL BLOWER ASSEMBLY (w/ Climate Control Seat System)

a.

for Driver Side:

i.
B490188

Disengage the wire harness clamp and disconnect the connector.



b.

for Front Passenger Side:

i.
B588992

Disconnect the connector.



c.
B490190

Remove the 2 bolts.


d.

Disengage the hook and remove the seat cushion climate control blower assembly.


Hide 71876 32.REMOVE RECLINING ADJUSTER INSIDE COVER LH (for Driver Side)

a.

for LH Side:

i.
B564748

Disengage the 4 claws to remove the reclining adjuster inside cover LH.



b.

for RH Side:

i.
B564749

Disengage the 4 claws to remove the reclining adjuster inside cover LH.



Hide 71875B 33.REMOVE RECLINING ADJUSTER INSIDE COVER RH (for Front Passenger Side)

a.

for LH Side:

i.
B564750

Disengage the 4 claws to remove the reclining adjuster inside cover RH.



b.

for RH Side:

i.
B564752

Disengage the clamp and claw.


ii.
B564753

Disengage the 4 claws to remove the reclining adjuster inside cover RH.



Hide 71874 34.REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)

a.

for LH Side:

i.
B564754C01
2.479,0.385 2.917,0.385 true 2.021,1.51 2.021,1.365 true 1.385,1.375 2.594,1.375 true 2.927,0.302 3.115,0.5 0.188,0.198 10 true *a 2.615,1.281 2.927,1.438 0.313,0.156 10 false *b
*a Hook
*b Guide


Disengage the hook.


ii.

Disengage the 2 claws and 2 guides to remove the front seat lower cushion shield LH.



b.

for RH Side:

i.
B564755C01
2.542,0.458 3.063,0.458 true 2.188,1.625 2.823,1.625 true 3.073,0.354 3.271,0.542 0.198,0.188 10 false *a 2.844,1.542 3.156,1.698 0.313,0.156 10 false *b
*a Hook
*b Guide


Disengage the hook.


ii.

Disengage the claw and guide to remove the front seat lower cushion shield LH.



Hide 82192 35.REMOVE FRONT SEAT WIRE

a.

Disconnect each connector and disengage each clamp to remove the front seat wire.


Hide 71052A 36.REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY

a.
B439741

Disengage the 6 hooks to remove the front seat cushion spring sub-assembly from the front seat adjuster assembly.


Hide 7181B 37.REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER (for Driver Side)

a.
B564756

Remove the 2 screws.


b.
B564757C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 claws.


c.

Disengage the guide to remove the front seat cushion wire harness holder as shown in the illustration.


Hide 7181A 38.REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER (for Front Passenger Side)

a.
B481281

Remove the 2 screws.


b.

Disengage the claw to remove the front seat cushion wire harness holder.


Hide 71874U 39.REMOVE FRONT LH SEAT LOWER CUSHION SHIELD (for Driver Side)

a.
B564758C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claw and guide to remove the front LH seat lower cushion shield as shown in the illustration.


Hide 72266 40.REMOVE SEAT TRACK UPPER RAIL COVER

a.
B518993C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 4 claws to remove the seat track upper rail cover as shown in the illustration.

HINT:

Use the same procedure for both sides.



Hide 72125V 41.REMOVE REAR UPPER SEAT TRACK COVER

a.
B518995C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 4 claws to remove the rear upper seat track cover as shown in the illustration.

HINT:

Use the same procedure for both sides.



Hide 42.REMOVE POWER SEAT LIFTER MOTOR ASSEMBLY (for Driver Side)

Hide 43.REMOVE POWER SEAT TILT MOTOR ASSEMBLY (for Driver Side)