Home › Engine / Hybrid System › A25A-FXS, A25B-FXS (COOLING) › RADIATOR › 2020.11–2021.10
RM37A0E _51 Engine / Hybrid System _086910 A25A-FXS, A25B-FXS COOLING _0419155 RADIATOR A

A25A-FXS, A25B-FXS COOLING  RADIATOR  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during radiator assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link

*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.

Front bumper assembly*
·

Measurement of ultrasonic sensor detection angle

·

Ultrasonic sensor detection angle registration


Parking Support Brake System (Click here)
Front television camera view adjustment Panoramic View Monitor System (Click here)
Replacement or removal and installation of 2 or more parts:
·

Front television camera assembly, radiator grille sub-assembly or front bumper assembly

·

Rear television camera assembly

·

Side television camera assembly LH or outer rear view mirror assembly LH

·

Side television camera assembly RH or outer rear view mirror assembly RH


Television camera view adjustment Panoramic View Monitor System (Click here)
·

Swing grille actuator assembly

·

Radiator shutter sub-assembly


Change grille shutter control mode and/or perform initialization Grille Shutter System (Click here)

PROCEDURE

Hide 53852B 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851D 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

Hide 51420 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 5.DRAIN ENGINE COOLANT (for Engine)

Hide 6.REMOVE HEADLIGHT ASSEMBLY

Hide 52611 7.REMOVE FRONT BUMPER ENERGY ABSORBER

Hide 52021 8.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

Hide 88790B 9.REMOVE THERMISTOR ASSEMBLY (w/o Grille Shutter)

Hide 53019F 10.REMOVE RADIATOR SHUTTER SUB-ASSEMBLY (w/ Grille Shutter)

Hide 17750A 12.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 16595B 13.REMOVE NO. 1 RADIATOR AIR GUIDE LH

a.
A483452C01
0.042,0.063 0.385,0.313 0.344,0.25 12 true *A 0.021,2.406 0.385,2.74 0.365,0.333 12 true *B
*A w/o Grille Shutter
*B w/ Grille Shutter


Remove the clip and disengage the claw.


b.

Disengage the guide to remove the No. 1 radiator air guide LH.


Hide 16593B 14.REMOVE NO. 1 RADIATOR AIR GUIDE RH

a.
A483453C01
0.052,0.042 0.479,0.438 0.427,0.396 12 true *A 0.052,2.323 0.479,2.719 0.427,0.396 12 true *B
*A w/o Grille Shutter
*B w/ Grille Shutter


Remove the clip and disengage the claw.


b.

Disengage the guide to remove the No. 1 radiator air guide RH.


Hide 53205 15.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.
A455420

Disconnect the 2 horn connectors and vehicle approaching speaker assembly connector.


b.
A455425

Remove the bolt to separate the inlet hose.


c.
A455426

Disengage the clamp to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.


d.

Disengage the 3 claws.


e.

Remove the 5 bolts and upper radiator support sub-assembly.


Hide 16594A 16.REMOVE NO. 2 RADIATOR AIR GUIDE

a.
A455428

Remove the hood lock control cable assembly from the No. 2 radiator air guide.


b.
A455430

Remove the No. 2 radiator air guide.


Hide 16281N 17.DISCONNECT NO. 4 WATER BY-PASS HOSE

a.
A455431

Slide the clip and disconnect the No. 4 water by-pass hose from the radiator assembly.


Hide 16283D 18.DISCONNECT NO. 6 WATER BY-PASS HOSE

a.
A455432

Disconnect the No. 6 water by-pass hose from the radiator assembly.


Hide 16571C 19.DISCONNECT NO. 1 RADIATOR HOSE

a.
A455436

Disengage the clamp to disconnect the No. 1 radiator hose from the fan with motor assembly.


b.
A455437

Slide the clip and disconnect the No. 1 radiator hose from the radiator assembly.


Hide 16572D 20.DISCONNECT NO. 2 RADIATOR HOSE

a.
A455433

Disengage the clamp to disconnect the No. 2 radiator hose from the fan with motor assembly.


b.
A455434

Slide the clip and disconnect the No. 2 radiator hose from the radiator assembly.


Hide G9228A 21.DISCONNECT NO. 4 INVERTER COOLING HOSE

a.
A455439

Disengage the clamp to disconnect the No. 4 inverter cooling hose from the fan with motor assembly.


Hide G9229A 22.DISCONNECT NO. 5 INVERTER COOLING HOSE

a.
A455438

Disengage the 3 clamps to disconnect the No. 5 inverter cooling hose from the fan with motor assembly.


Hide 16400 23.REMOVE RADIATOR ASSEMBLY

a.
A455440

Disconnect the cooling fan motor connector.


b.

Disengage the clamp to disconnect the wire harness from the fan with motor assembly.


c.
A455441

Rotate the lever while pushing the lock, and disconnect the cooling fan motor connector.

NOTICE:

After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.



d.

Disengage the 2 clamps to disconnect the wire harness from the fan with motor assembly.


e.
A455443

Disengage the 2 claws.


f.

Disengage the 2 guides to separate the cooler condenser assembly from the radiator assembly.

NOTICE:

Make sure not to damage the cooler condenser assembly when separating the cooler condenser assembly.



g.

Remove the radiator assembly with the fan with motor assembly from the vehicle body.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or pipe when removing the radiator assembly with the fan with motor assembly.



h.
A455444

Disengage the 2 claws.


i.

Disengage the 2 guides to remove the fan with motor assembly from the radiator assembly.

NOTICE:

Do not damage the radiator assembly when removing the fan with motor assembly.



Hide 16523A 24.REMOVE RADIATOR SUPPORT CUSHION

a.

Remove the 2 radiator support cushions from the radiator assembly.


Hide 16535 25.REMOVE LOWER RADIATOR SUPPORT

a.

Remove the 2 lower radiator supports from the radiator assembly.