When replacing the body ECU, be sure to initialize the automatic light control system.
Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>INITIALIZATION
As the door control battery is installed between the vehicle battery and body ECU, first perform the inspections to confirm that there are no malfunctions in the power source circuit for the body ECU before performing this troubleshooting procedure.
Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>PRECAUTION
When replacing the combination meter assembly, make sure to replace it with a new one.
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom | Suspected Area | Link |
|---|---|---|
| License plate light does not illuminate (taillights are normal). | License plate light bulb |
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| Follow me home system does not operate. | Body ECU (for LHD) |
|
| Body ECU (for RHD) |
|
|
| Harness or connector | - |