Home › Engine / Hybrid System › 1KD-FTV (LUBRICATION) › ENGINE OIL COOLER › 2015.06–2020.08
RM27T0E _51 Engine / Hybrid System _053689 1KD-FTV LUBRICATION _0260701 ENGINE OIL COOLER A

1KD-FTV LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

Install 2 new gaskets to the oil cooler.


b.

Install the oil cooler to the oil cooler cover with the 4 nuts.

Torque:
16 N*m (163 kgf*cm, 12 ft.*lbf)


Hide 15701C 2.INSTALL OIL COOLER COVER SUB-ASSEMBLY

a.

Install a new gasket and the oil cooler cover with the 13 bolts.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


b.

Connect the No. 2 vacuum transmitting pipe with the 2 nuts.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


c.

Connect the vinyl tube.


d.

Connect the oil pressure switch connector.


Hide 16267 4.CONNECT NO. 3 WATER BY-PASS HOSE (w/ EGR Cooler)

a.

Connect the No. 3 water by-pass hose.


Hide 22100 6.INSTALL SUPPLY PUMP ASSEMBLY

Hide 23810A 7.INSTALL COMMON RAIL ASSEMBLY

Hide 28100 8.INSTALL STARTER ASSEMBLY

a.

b.

c.

Hide 51405A 15.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY