Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › SIDE MONITOR SYSTEM › 2015.06–2017.08
RM27T0E _56 Audio / Visual / Telematics _053722 PARK ASSIST / MONITORING _0261013 SIDE MONITOR SYSTEM T

PARK ASSIST / MONITORING  SIDE MONITOR SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms the listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected area below.



NOTICE:

The following inspection procedure of the side monitor system is described on the assumption that the navigation system or audio and visual system is normal. If navigation system or audio and visual system has any malfunction, first proceed with troubleshooting of the navigation system or audio and visual system.


General
Symptom Suspected Area See page
When the front and side monitor main switch on, the side monitor image is not displayed (screen is not black). Proceed to ""CHK" message(s) are displayed on the SIGNAL CHECK screen" (Click here)
Data List/Active Test - AISIC Output Status (Click here)
Proceed to "Image from Camera for Side Monitor is Abnormal" (Click here)
When the front and side monitor main switch on, the side monitor image is not displayed (screen is black). Data List/Active Test - AISIC Output Status (Click here)
Proceed to "Image from Camera for Side Monitor is Abnormal" (Click here)
When the front and side monitor main switch off, the side monitor image is displayed. Proceed to ""CHK" Message(s) are Displayed on the SIGNAL CHECK Screen" (Click here)
Navigation receiver assembly (for Navigation Receiver Type) (Click here)
Radio and display receiver assembly (for Radio and Display Type) (Click here)

Display Malfunction
Symptom Suspected Area See page
Assist lines are not displayed. Parking assist ECU (for LHD) (Click here)
Parking assist ECU (for RHD) (Click here)
"System initializing" is displayed. Correct the steering angle neutral point (Click here)
Images from all cameras (rear and side television camera) are abnormal. Data List/Active Test - AISIC Output Status (Click here)
Proceed to "Image from Camera for Parking Assist Monitor is Abnormal" (Click here)
Image from camera for side monitor is abnormal (parking assist monitor system is normal). Proceed to "Image from Camera for Side Monitor is Abnormal" (Click here)
Message indicating "System not ready" is displayed even after setting is finished. Parking assist ECU (for LHD) (Click here)
Parking assist ECU (for RHD) (Click here)

Side Monitor System Malfunction
Symptom Suspected Area See page
"CHK" message(s) are displayed on the SIGNAL CHECK screen. Proceed to ""CHK" Message(s) are Displayed on the SIGNAL CHECK Screen" (Click here)