Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY (for 3 Door) › 2015.06–2020.08
RM27T0E _59 Vehicle Exterior _053744 DOOR / HATCH _0261251 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 3 Door) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 3 Door)  INSTALLATION  


PROCEDURE

Hide 77035 1.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.

for LHD:

Attach the 12 clamps to install the fuel lid lock control cable.


b.

for RHD:

Attach the 14 clamps to install the fuel lid lock control cable.


c.
B238499

Install the lock retainer and turn it clockwise.


d.
B238501

Install the cable and turn it clockwise as shown in the illustration.


Hide 58510D 2.INSTALL FRONT FLOOR CARPET ASSEMBLY

a.

for LHD:

i.
B243465

Return the front floor carpet to its original position and attach the 4 clamps.



b.

for RHD:

i.
B243467

Return the front floor carpet to its original position and attach the 8 clamps.



Hide 67910 5.INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

Hide 62640P 6.INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH

Hide 64712F 10.INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

Hide 64937A 11.INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

Hide 64725D 12.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 58574A 16.INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

Hide 64910M 18.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Hide 19.INSTALL REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)

Hide 58810J 20.INSTALL CONSOLE BOX ASSEMBLY (for RHD)

a.

for Automatic Transmission:

Install the console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>INSTALLATION).


b.

for Manual Transmission:

Install the console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>INSTALLATION).


c.

w/ Refrigerated Cool Box:

Install the console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX (w/ Refrigerated Cool Box)>INSTALLATION).


Hide 21.INSTALL FRONT SEAT ASSEMBLY (for RHD)

a.

for Manual Seat:

Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION).


b.

for Walk in Seat:

Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Walk in Seat Type)>INSTALLATION).


Hide 22.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).