Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY (for 5 Door) › 2015.06–2017.08
RM27T0E _59 Vehicle Exterior _053744 DOOR / HATCH _0261250 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 5 Door) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 5 Door)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).


PROCEDURE

Hide 77035 1.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.

for LHD:

Attach the 14 clamps to install the fuel lid lock control cable.


b.

for RHD:

Attach the 17 clamps to install the fuel lid lock control cable.


c.
B238499

Install the lock retainer and turn it clockwise.


d.
B238501

Install the cable and turn it clockwise as shown in the illustration.


Hide 58510D 2.INSTALL FRONT FLOOR CARPET ASSEMBLY

a.
B243464

for LHD:

i.

Return the front floor carpet to its original position and attach the 6 clamps.



b.
B243466

for RHD:

i.

Return the front floor carpet to its original position and attach the 12 clamps.



Hide 77306 3.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.

Connect the fuel lid lock control cable assembly to the fuel lid lock open lever sub-assembly.


b.

Attach the 3 claws to install the fuel lid control lever sub-assembly.


Hide 67910 5.INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

Hide 62640P 6.INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH

Hide 74603C 8.INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

Hide 74617A 9.INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

Hide 64712F 10.INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

Hide 64937A 11.INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

Hide 64725D 12.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 73233A 13.INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

Hide 58570C 14.INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

Hide 57412C 15.INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

Hide 57411D 16.INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

Hide 58574A 17.INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

Hide 58401A 18.INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

Hide 64717A 19.INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

Hide 64910M 20.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Hide 62332C 21.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 67917C 23.INSTALL REAR DOOR SCUFF PLATE RH (for RHD)

Hide 67934 24.INSTALL QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)

Hide 67933 25.INSTALL QUARTER SCUFF PLATE RH (for RHD, Rear No. 2 Seat)

Hide 58371F 26.INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

Hide 27.INSTALL REAR NO. 1 SEATBACK ASSEMBLY (w/ Rear No. 1 Seat)

a.

for 60/40 Split Double-folding Seat Type LH Side:

Install the rear No. 1 seatback assembly (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type LH Side)>INSTALLATION).


b.

for 60/40 Split Double-folding Seat Type RH Side:

Install the rear No. 1 seatback assembly (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Double-folding Seat Type RH Side)>INSTALLATION).


Hide 28.INSTALL REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)

a.

for 60/40 Split Slide Walk-in Seat Type LH Side:

Install the rear No. 1 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type LH Side)>INSTALLATION).


b.

for 60/40 Split Slide Walk-in Seat Type RH Side:

Install the rear No. 1 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Slide Walk-in Seat Type RH Side)>INSTALLATION).


Hide 29.INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)

a.

for Manual Seat Type:

Install the rear No. 2 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side)>INSTALLATION).


b.

for Power Seat Type:

Install the rear No. 2 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type LH Side)>INSTALLATION).


c.

for Face to Face Seat Type:

Install the rear No. 2 seat assembly (See page Vehicle Interior>SEAT>REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type)>INSTALLATION).


Hide 58810J 30.INSTALL CONSOLE BOX ASSEMBLY

a.

for Automatic Transmission:

Install the console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Automatic Transmission)>INSTALLATION).


b.

for Manual Transmission:

Install the console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(for Manual Transmission)>INSTALLATION).


c.

w/ Refrigerated Cool Box:

Install the console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX (w/ Refrigerated Cool Box)>INSTALLATION).


Hide 31.INSTALL FRONT SEAT ASSEMBLY

a.

for Manual Seat:

Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>INSTALLATION).


b.

for Power Seat:

Install the front seat assembly (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>INSTALLATION).


Hide 32.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).