Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom | Suspected Area | Link |
|---|---|---|
| Map light assembly do not illuminate. | Map light bulb |
|
| Map light assembly |
|
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| No. 1 room light assembly do not illuminate. | No. 1 room light assembly |
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| No. 2 room light assembly do not illuminate. | No. 2 room light assembly |
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| Vanity light assembly LH or vanity light assembly RH does not illuminate. | Visor light bulb |
|
| Visor assembly |
|
|
| Harness or connector | - |
| Symptom | Suspected Area | Link |
|---|---|---|
| Transponder key light do not illuminate. | Transponder key coil |
|
| Harness or connector | - |