89438A
1.INSTALL POWER STEERING OIL PRESSURE SWITCH
Apply a light coat of power steering fluid to the O-ring of the power steering oil pressure switch.
Using a 19 mm deep socket wrench, install the power steering oil pressure switch.
Do not allow foreign matter to contact the oil seal face of the power steering oil pressure switch (connecting surface with pressure feed tube).
Be careful not to damage the O-ring when installing the power steering oil pressure switch.
Connect the power steering oil pressure switch connector.
16470
2.INSTALL RADIATOR RESERVOIR ASSEMBLY
44369A
3.INSTALL NO. 1 OIL RESERVOIR BRACKET
44360
4.INSTALL VANE PUMP OIL RESERVOIR ASSEMBLY
17885
5.INSTALL NO. 1 AIR CLEANER PIPE SUB-ASSEMBLY
87208
6.INSTALL HEATER WATER PIPE SUB-ASSEMBLY (w/ Viscous Heater)
17363K
7.INSTALL NO. 3 AIR TUBE
17341F
8.INSTALL NO. 1 AIR HOSE
17861
9.INSTALL INTAKE AIR CONNECTOR
17881
10.TEMPORARILY INSTALL NO. 1 AIR CLEANER HOSE
17705
11.INSTALL AIR CLEANER CAP SUB-ASSEMBLY
87209
12.CONNECT WATER HOSE SUB-ASSEMBLY (w/ Viscous Heater)
Connect the 2 water hoses.
17972
13.INSTALL NO. 2 COOL AIR INLET (w/o Intercooler)
17971
14.INSTALL NO. 1 COOL AIR INLET (w/o Intercooler)
17940D
15.INSTALL INTERCOOLER ASSEMBLY (w/ Intercooler)
16361A
16.INSTALL V-RIBBED BELT
17.INSTALL NO. 3 IDLER PULLEY (w/ Viscous Heater)
16630H
18.INSTALL NO. 1 IDLER PULLEY (w/ Viscous Heater)
87120H
19.INSTALL V-RIBBED BELT (w/ Viscous Heater)
20.ADD ENGINE COOLANT
21.INSPECT FOR COOLANT LEAK
51405A
22.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
53805
23.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
53806
24.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH