Home › Engine / Hybrid System › 3UR-FE (LUBRICATION) › ENGINE OIL COOLER
RM2660E _51 Engine / Hybrid System _052796 3UR-FE LUBRICATION _0255206 ENGINE OIL COOLER A

3UR-FE LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 53806 1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 83520 9.REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY

Hide 88320 10.DISCONNECT COOLER COMPRESSOR ASSEMBLY

Hide 16207 11.REMOVE NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A162468

Remove the 3 bolts.


b.

Disconnect the 4 hoses and remove the water by-pass pipe.


Hide 15781 12.REMOVE NO. 1 OIL COOLER BRACKET

a.
A163672

Remove the 2 nuts and bracket.


b.

Disconnect the ground wire from the cylinder block.


Hide 15671 13.REMOVE OIL FILTER BRACKET

a.
A162469

Remove the 2 bolts, 2 nuts and filter bracket.


b.
A162470

Remove the 2 O-rings.


Hide 15710 14.REMOVE OIL COOLER ASSEMBLY

a.
A162471

Remove the 5 nuts and oil cooler from the oil filter bracket.


b.
A162475

Remove the 2 O-rings.


Hide 15788 15.REMOVE OIL COOLER SPACER

a.
A162472

Remove the bolt and oil cooler spacer from the oil filter bracket.


b.
A162474E06
2.229,0.729 2.583,0.438 2.583,0.438 2.844,0.438 true 2.875,0.354 3.063,0.531 0.188,0.177 10 false *1

Remove the gasket.

Text in Illustration
*1 Gasket