Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING AMPLIFIER › from 2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255673 AIR CONDITIONING AMPLIFIER A

HEATING / AIR CONDITIONING  AIR CONDITIONING AMPLIFIER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the LHD vehicle and RHD vehicle.

·

The procedures listed below are for the LHD vehicle.



PROCEDURE

Hide 88650N 1.INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY

E335814

a.

Install the air conditioner amplifier assembly with the screw.


b.

Connect the 3 connectors.


Hide 87201 2.INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY

a.

Install the No. 1 air duct sub-assembly with the screw.


Hide 55433B 3.INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

Hide 55476A 4.INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

Hide 73990 5.INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

Hide 55312 6.INSTALL LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)

Hide 55607 7.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

Hide 55402C 8.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

Hide 55448A 9.INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

Hide 11.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 12.CHECK SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)