Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL(w/o Multi-display) › 2014.08–2015.08
RM2660E _58 Vehicle Interior _052847 HEATING / AIR CONDITIONING _0255686 AIR CONDITIONING PANEL(w/o Multi-display) A

HEATING / AIR CONDITIONING  AIR CONDITIONING PANEL(w/o Multi-display)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the LHD vehicle and RHD vehicle.

·

The procedures listed below are for the LHD vehicle.



PROCEDURE

Hide 55900 1.INSTALL AIR CONDITIONING CONTROL ASSEMBLY

a.

Connect the connectors.


b.
E156897

Insert the radio receiver and attach the 5 claws on its backside.

NOTICE:

When inserting the radio receiver, do not press the knobs on it.



Hide 55406B 2.INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 55402C 3.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

Hide 55448A 4.INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 55403C 5.INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

Hide 55449C 6.INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 86120 7.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

Hide 55412C 8.INSTALL NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL

Hide 55680A 9.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55670 10.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55510F 11.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

Hide 12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).