When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
When replacing the combination meter assembly, always check that ECU security key is registered.
Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>UPDATE ECU SECURITY KEY
The following problem symptoms table is based on the assumption that each system related to the combination meter assembly is normal.
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
| Symptom | Suspected Area | Link |
|---|---|---|
| Other indicator lights malfunction | Combination meter assembly | ![]() |
| Other warning lights malfunction | Combination meter assembly | ![]() |
| Symptom | Suspected Area | Link |
|---|---|---|
| Other buzzers malfunction | Combination meter assembly | ![]() |