| *A | w/ Curtain Shield Airbag, Rear No. 2 Seat | *B | w/ Spacer |
| *C | w/ Air Duct | - | - |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 12 | REAR NO. 1 SEAT PROTECTOR | 71695S | - | - | - |
| 13 | REAR NO. 2 SEAT PROTECTOR | 71695T | - | - | - |
| 14 | REAR NO. 3 SEAT PROTECTOR | 71695Y | - | - | - |
| 15 | REAR NO. 4 SEAT PROTECTOR | 71F95 | - | - | - |
| 16 | FRONT FLOOR CARPET ASSEMBLY | 58510D | - | - | - |
| 17 | REAR NO. 4 SIDE AIR DUCT | 87217G | - | - | - |
| 18 | REAR NO. 6 SIDE AIR DUCT | 87217K | - | - | - |
| 19 | REAR NO. 7 AIR DUCT | 87212L | - | - | - |
| 20 | REAR FLOOR SILENCER | 58556C | - | - | - |
| *A | w/ Air Duct | - | - |
| *A | w/ Woofer | *B | w/o Tire Pressure Warning System |
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the No. 3 antenna cord sub-assembly removal/installation are shown below.
When the cable is disconnected/reconnected to the battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
Learning completes when vehicle is operated normally
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
1. PRECAUTION
2.REMOVE ROOF HEADLINING ASSEMBLY
62180A 3.REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Curtain Shield Airbag, Rear No. 2 Seat)
62170A 4.REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH (w/ Curtain Shield Airbag, Rear No. 2 Seat)
Use the same procedure described for the LH side.
62495B 5.REMOVE NO. 2 ROOF SIDE INNER GARNISH SPACER RH (w/ Spacer)
6.REMOVE COOLER PLATE (w/ Air Duct)
87217N 7.REMOVE REAR NO. 9 SIDE AIR DUCT (w/ Air Duct)
88566S 8.REMOVE REAR NO. 2 ROOF AIR DUCT (w/ Air Duct)
88566U 9.REMOVE REAR NO. 4 ROOF AIR DUCT (w/ Air Duct)
88566T 10.REMOVE REAR NO. 3 ROOF AIR DUCT (w/ Air Duct)
88566R 11.REMOVE REAR NO. 1 ROOF AIR DUCT
71695S 12.REMOVE REAR NO. 1 SEAT PROTECTOR
71695T 13.REMOVE REAR NO. 2 SEAT PROTECTOR
71695Y 14.REMOVE REAR NO. 3 SEAT PROTECTOR
Use the same procedure described for the rear No. 1 seat protector.
71F95 15.REMOVE REAR NO. 4 SEAT PROTECTOR
Use the same procedure described for the rear No. 1 seat protector.
58510D 16.REMOVE FRONT FLOOR CARPET ASSEMBLY
The illustrations are representative examples, and details may differ.
|
Fastner | - | - |
87217G 17.REMOVE REAR NO. 4 SIDE AIR DUCT (w/ Air Duct)
87217K 18.REMOVE REAR NO. 6 SIDE AIR DUCT (w/ Air Duct)
87212L 19.REMOVE REAR NO. 7 AIR DUCT (w/ Air Duct)
58556C 20.REMOVE REAR FLOOR SILENCER
|
Remove in this Direction | - | - |
89740A 22.REMOVE SMART DOOR CONTROL RECEIVER ASSEMBLY (w/o Tire Pressure Warning System)
58123A 24.REMOVE SHIFT AND SELECT LEVER SUPPORT
86101D 25.REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY
The illustrations are representative examples, and details may differ.