Home › Vehicle Interior › SEAT › SEAT HEATER SYSTEM › from 2021.07
RM38G0E _58 Vehicle Interior _100628 SEAT _0467516 SEAT HEATER SYSTEM J

SEAT  SEAT HEATER SYSTEM  Seat Heater for Front Right Seat does not Operate  


DESCRIPTION

When the seat heater switch (front right side) is operated, the air conditioning amplifier assembly receives the signal. The air conditioning amplifier assembly receives the signal and operates the front right side seat heater.

WIRING DIAGRAM

E444468E25
0.198,4.844 1.792,5.208 1.594,0.365 10 false Air Conditioning Amplifier Assembly 2.104,4.49 3.365,4.917 1.26,0.427 10 false Seat Heater Control Sub-assembly RH 4.01,4.479 5.646,5.177 1.635,0.698 10 false Front Seat Cushion Heater Assembly RH 6,4.438 6.958,5.313 0.958,0.875 10 false Front Seatback Heater Assembly RH 0.719,5.396 2.49,5.583 1.771,0.188 10 false : LIN Communication Line 5.552,0.99 7.031,1.573 1.479,0.583 10 false Air Conditioning Control Assembly 1.969,1.083 2.823,1.406 0.854,0.323 10 false S/HTR FR 3.167,0.958 4.74,1.25 1.573,0.292 10 false from Battery 5.625,0.469 6.115,0.698 0.49,0.229 10 false LIN1 0.917,0.469 1.344,0.792 0.427,0.323 10 false LIN1 2.104,4.333 2.385,4.51 0.281,0.177 10 false h21 2.177,2.865 2.5,3.042 0.323,0.177 10 false +B1 2.177,3.906 2.563,4.083 0.385,0.177 10 false SWR 3.125,2.885 3.354,3.063 0.229,0.177 10 false E 2.896,3.917 3.302,4.094 0.406,0.177 10 false HTR1 0.24,4.656 0.667,4.896 0.427,0.24 10 false I31 0.823,3.927 1.281,4.094 0.458,0.167 10 false SM1R 1.302,3.792 1.563,4.073 0.26,0.281 10 false 12 1.948,3.792 2.094,3.958 0.146,0.167 10 false 5 1.969,2.771 2.115,2.938 0.146,0.167 10 false 1 3.344,2.76 3.552,2.938 0.208,0.177 10 false 10 3.365,3.792 3.51,3.979 0.146,0.188 10 false 7 4.031,4.271 4.448,4.573 0.417,0.302 10 false h9 4.156,3.813 4.281,4 0.125,0.188 10 false 1 4.167,2.76 4.479,3.052 0.313,0.292 10 false 6 4.146,1.823 4.375,2.073 0.229,0.25 10 false 2

CAUTION / NOTICE / HINT

NOTICE:
·

If the battery voltage is low, the seat heater system may not operate. When "High Power Consumption Partial Limit on AC/Heater Operation" is displayed on the multi-information display in the combination meter assembly, inspect the battery, referring to On-vehicle Inspection for the charging system.

for 1GR-FE: Click herePower Source / Network>1GR-FE (BATTERY / CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION

for V35A-FTS: Click herePower Source / Network>V35A-FTS (BATTERY / CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION

for F33A-FTV: Click herePower Source / Network>F33A-FTV (BATTERY / CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION

·

w/ Power Tilt and Power Telescopic Steering Column

If the mirror heater is operated when the battery voltage is low, due to the electrical load limit control that gives voltage supply priority to the power steering system, the mirror heater may not operate. In this case, check the vehicle control history of the power steering system and check that "Battery Voltage Drop: X21B6" is not stored before proceeding with troubleshooting.

Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM (w/ Variable Flow Control Solenoid Valve)>VEHICLE CONTROL HISTORY (RoB)

·

Inspect the fuses for circuits related to this system before performing the following procedure.



PROCEDURE

1.PERFORM ACTIVE TEST USING GTS (SEAT HEATER)
a.

Perform the Active Test according to the display on the GTS.

Body Electrical > Air Conditioner > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Front Right Seat Heater Front right side seat heater operation OFF/ON -
Body Electrical > Air Conditioner > Active Test
Tester Display
Front Right Seat Heater
50004 121 116
OK:

Front right side seat heater operates normally.



Result:
Proceed to
OK
NG



OK

2.CHECK SEAT HEATER OPERATION

NG

3.CHECK HARNESS AND CONNECTOR (SEAT HEATER CONTROL SUB-ASSEMBLY RH - BATTERY)
2.CHECK SEAT HEATER OPERATION
a.

Check the seat heater operation.

Click hereVehicle Interior>SEAT>SEAT HEATER SYSTEM>OPERATION CHECK

OK:

The seat heater operates normally.



Result:
Result Proceed to

*: w/ TOYOTA Multi Operation Touch System

Does not operate normally with operation of either the multi-display* or seat heater switch A
Does not operate normally with operation of the multi-display* B
Does not operate normally with operation of the seat blower switch C



A

B

C

3.CHECK HARNESS AND CONNECTOR (SEAT HEATER CONTROL SUB-ASSEMBLY RH - BATTERY)
a.

Disconnect the h21 seat heater control sub-assembly RH connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition

Click Location & Routing(h21)Location & Routing

Click Connector(h21)Seat>Front Seat Wire RH>Seat Heater Control Sub-Assembly RH (Front Seat RH)

h21-1 (+B1) - Body ground Always 11 to 14 V



Result:
Proceed to
OK
NG



OK

4.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - SEAT HEATER CONTROL SUB-ASSEMBLY RH)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - SEAT HEATER CONTROL SUB-ASSEMBLY RH)
a.

Disconnect the I31 air conditioning amplifier assembly connector.


b.

Disconnect the h21 seat heater control sub-assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(I31,h21)Location & Routing

Click Connector(I31)Instrument Panel>Instrument Panel Wire / Mobile Wireless Charger Cord / No. 1 Navigation Wire / No. 2 Instrument Panel Wire / No. 5 Instrument Panel Wire / Telephone Computer Wire>Air Conditioning Amplifier Assembly

Click Connector(h21)Seat>Front Seat Wire RH>Seat Heater Control Sub-Assembly RH (Front Seat RH)

I31-12 (SM1R) - h21-5 (SWR) Always Below 1 Ω
I31-12 (SM1R) or h21-5 (SWR) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.CHECK HARNESS AND CONNECTOR (FRONT SEAT CUSHION HEATER ASSEMBLY RH - SEAT HEATER CONTROL SUB-ASSEMBLY RH AND BODY GROUND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.CHECK HARNESS AND CONNECTOR (FRONT SEAT CUSHION HEATER ASSEMBLY RH - SEAT HEATER CONTROL SUB-ASSEMBLY RH AND BODY GROUND)
a.

Disconnect the h9 front seat cushion heater assembly RH connector.


b.

Disconnect the h21 seat heater control sub-assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

Click Location & Routing(h9,h21)Location & Routing

Click Connector(h9)Seat>Front Seat Wire RH>Front Seat Cushion Heater RH (Front Seat Cushion Pad RH)

Click Connector(h21)Seat>Front Seat Wire RH>Seat Heater Control Sub-Assembly RH (Front Seat RH)

h9-6 - h21-10 (E) Always Below 1 Ω
h9-6 or h21-10 (E) - Body ground Always 10 kΩ or higher
h9-1 - h21-7 (HTR1) Always Below 1 Ω
h9-1 or h21-7 (HTR1) - Body ground Always 10 kΩ or higher
h9-2 - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

6.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

6.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH

OK

7.INSPECT FRONT SEATBACK HEATER ASSEMBLY RH

NG

REPLACE FRONT SEAT CUSHION HEATER ASSEMBLY RH

7.INSPECT FRONT SEATBACK HEATER ASSEMBLY RH

Click hereVehicle Interior>SEAT>FRONT SEATBACK HEATER>INSPECTION

Result:
Proceed to
OK
NG



OK

8.REPLACE SEAT HEATER CONTROL SUB-ASSEMBLY RH

NG

REPLACE FRONT SEATBACK HEATER ASSEMBLY RH

8.REPLACE SEAT HEATER CONTROL SUB-ASSEMBLY RH
a.

Replace the seat heater control sub-assembly RH with a new or known good one.

Click hereVehicle Interior>SEAT>SEAT HEATER CONTROL (for Front Seat)>REMOVAL


Result:
Proceed to
NEXT



NEXT

9.CHECK FRONT SEAT HEATER OPERATION
9.CHECK FRONT SEAT HEATER OPERATION
a.

Check the front right side seat heater operation.

Click hereVehicle Interior>SEAT>SEAT HEATER SYSTEM>OPERATION CHECK

OK:

Front right side seat heater operates normally.



Result:
Proceed to
OK
NG



OK

END (SEAT HEATER CONTROL SUB-ASSEMBLY RH WAS DEFECTIVE)

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY