Home › Engine / Hybrid System › 1HZ (ENGINE MECHANICAL) › ENGINE UNIT
RM25T0E _51 Engine / Hybrid System _029355 1HZ ENGINE MECHANICAL _0133486 ENGINE UNIT A

1HZ ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  


PROCEDURE

Hide 17138A 1.REMOVE INTAKE PIPE STAY

Hide 25601 2.REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY (w/ EGR System)

Hide 25620 3.REMOVE EGR VALVE ASSEMBLY (w/ EGR System)

Hide 17167 4.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

Hide 5.REMOVE EXHAUST MANIFOLD ASSEMBLY

Hide 15601 6.REMOVE OIL FILTER SUB-ASSEMBLY

Hide 11452 7.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

Hide 78104 9.REMOVE NO. 2 ACCELERATOR CONNECTING ROD SUB-ASSEMBLY

Hide 78103 10.REMOVE NO. 1 ACCELERATOR CONNECTING ROD SUB-ASSEMBLY

Hide 25860A 11.REMOVE NO. 1 VACUUM SWITCHING VALVE

Hide 13.REMOVE INJECTION PIPE SUB-ASSEMBLY

Hide 22100 14.REMOVE INJECTION PUMP

Hide 83520 15.REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY (w/ Oil Pressure Gauge)

Hide 83530 16.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (w/o Oil Pressure Gauge)

Hide 12315 17.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

a.

Remove the 4 bolts and front No. 1 engine mounting bracket LH.


Hide 12311 18.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH

a.

Remove the 4 bolts and front No. 1 engine mounting bracket RH.


Hide 16321 19.REMOVE WATER INLET

Hide 16331A 20.REMOVE THERMOSTAT

Hide 21.REMOVE VACUUM PUMP TUBE

a.
A327194

Remove the 2 union bolts and 4 gasket.


b.

Remove the bolt and vacuum pump tube.


Hide 22.REMOVE VACUUM PUMP ASSEMBLY

a.
A327195

Remove the 2 nuts and vacuum pump assembly.


b.

Remove the O-ring.


Hide 16331 23.REMOVE OUTLET WATER

a.

Remove the 2 nuts and outlet water and gasket.


Hide 11322A 24.REMOVE NO. 1 TIMING BELT COVER

Hide 25.SET NO. 1 CYLINDER TO BDC/COMPRESSION

Hide 13505 27.REMOVE NO. 1 TIMING BELT IDLER SUB-ASSEMBLY

Hide 13528 28.REMOVE CAMSHAFT DRIVE GEAR

Hide 19871 29.REMOVE NO. 1 GLOW PLUG CONNECTOR

Hide 19850 30.REMOVE GLOW PLUG ASSEMBLY

Hide 88444 31.REMOVE IDLE PULLEY BRACKET (w/ Air Conditioning System)

a.

Remove the 2 bolts and idle pulley bracket from the No. 1 compressor mounting bracket.


Hide 88431 32.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)

a.

Remove the 4 bolts and No. 1 compressor mounting bracket from the cylinder head sub-assembly and cylinder block.


Hide 16268 33.REMOVE NO. 1 WATER BY-PASS PIPE (w/ Heater)

a.

Remove the bolt and No. 1 water by-pass pipe from the cylinder block.