Home › Drivetrain › BF1B (TRANSFER / 4WD / AWD) › TRANSFER SHIFT LEVER ASSEMBLY › 2014.08–2022.09
RM25T0E _52 Drivetrain _030709 BF1B TRANSFER / 4WD / AWD _0142855 TRANSFER SHIFT LEVER ASSEMBLY A

BF1B TRANSFER / 4WD / AWD  TRANSFER SHIFT LEVER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 36321 1.INSTALL FRONT TRANSFER DRIVE SHIFT LEVER (for Direct Shift Type)

a.

Install a new bush to the front transfer drive shift lever.


b.
C311923

Install the front transfer drive shift lever and 2 washers and then install a new clip.


c.

Install the transfer shift lever shaft and wave washer.


d.

Install the 2 washers and nut.

Torque:
44.1 N*m (450 kgf*cm, 33 ft.*lbf)


Hide 36323 2.INSTALL TRANSFER SHIFT LEVER GUIDE (for Direct Shift Type)

a.

Install the front drive shift link lever bush.


b.
C312475

Install the transfer shift lever guide with the 2 bolts.

Torque:
39.2 N*m (400 kgf*cm, 29 ft.*lbf)


c.

Install the nut, washer and wave washer.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)



Hide 36322 3.INSTALL TRANSFER HIGH AND LOW SHIFT LEVER (for Vacuum Shift Type)

a.

Install the 2 transfer shift lever bush, high and low shift rod grommet and high and low shift rod spacer to the transfer high and low shift lever.


b.
C311908

Install the high and low shift rod pin and transfer high and low shift lever and then Install a new clip.


c.

Install the nut, wave washer and washer.

Torque:
24.5 N*m (250 kgf*cm, 18 ft.*lbf)


Hide 37140 4.INSTALL FRONT PROPELLER SHAFT ASSEMBLY

Hide 58286 5.INSTALL NO. 1 SHIFT AND SELECT LEVER BOOT

a.
C312473

Install the No. 1 shift and select lever boot with the 6 bolts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


b.

Return the floor carpet to its original position.

HINT:

Install the front seat assembly if it was removed.




Hide 36303 6.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C311945C01
0.948,1.458 1.125,1.458 1.125,1.458 1.635,0.948 true 2.677,1.198 2.5,1.198 2.5,1.198 2.219,0.49 true 0.698,1.406 0.99,1.667 0.292,0.26 10 true *1 2.719,1.125 3.01,1.385 0.292,0.26 10 true *2
*1 Shift Lever Knob Sub-assembly (for Transfer Side)
*2 Shift Lever Knob Sub-assembly (for Transmission Side)


Twist the 2 shift lever knob sub-assembly in the direction indicated by the arrow and remove it.


Hide 89441A 7.INSTALL DECELERATION SENSOR (w/ ABS)

Hide 89170 8.INSTALL AIRBAG SENSOR ASSEMBLY WITH AIRBAG SENSOR BRACKET (w/ Airbag System)

Hide 62112A 12.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

Hide 62111A 13.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 67913 15.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL