| *1 | FC STACK AIR INLET PIPE ASSEMBLY | *2 | FC STACK AIR OUTLET PIPE ASSEMBLY |
| ● | Non-reusable part | - | - |
51420A
2.REMOVE FRONT COMPARTMENT UNDER COVER ASSEMBLY
58404B
3.REMOVE REAR NO. 4 FLOOR BOARD SUB-ASSEMBLY
17C10
5.REMOVE FC AIR PRESSURE REGULATOR ASSEMBLY (AIR SEALING VALVE)
|
|
| *1 | Air Particulate Filter | - | - |
To prevent contamination by foreign matter or water droplets, cover the connecting portions of the FC air pressure regulator assembly (air sealing valve), FC stack air inlet pipe assembly and FC stack air and water inlet with protective tape.
17C10
7.REMOVE FC AIR PRESSURE REGULATOR ASSEMBLY (AIR PRESSURE REGULATING VALVE)
To prevent contamination by foreign matter or water droplets, cover the connecting portions of the FC air pressure regulator assembly (air pressure regulating valve), FC stack air outlet pipe assembly and FC stack air outlet with protective tape.