Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER (for RHD) › from 2021.08
RM37H0E _54 Brake _096747 BRAKE SYSTEM (OTHER) _0454026 BRAKE BOOSTER(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for RHD)  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
C447302N05
3.333,0.25 4.333,0.417 1,0.167 3.292,0.208 4.375,0.458 1.083,0.25 4.958,4.344 6.042,4.594 1.083,0.25 5,4.385 6,4.552 1,0.167 1.521,3.865 1.771,3.865 1.771,3.865 1.771,3.479 false 3.083,4.542 3.333,4.542 3.333,4.542 3.333,4.208 false 4.833,3.917 5.583,3.917 false 5.083,0.75 5.323,0.635 5.323,0.635 5.583,0.635 false 4.333,0.333 4.667,0.333 false 4.667,4.302 4.667,4.469 4.667,4.469 5,4.469 false 1.333,3.74 1.75,4.073 0.417,0.333 18 false 4 2.865,4.417 3.281,4.75 0.417,0.333 18 false 3 5.99,0.531 6.406,0.865 0.417,0.333 18 false 1 5.969,3.802 6.385,4.135 0.417,0.333 18 false 2 3.385,0.271 4.552,0.521 1.167,0.25 8 false 6.6 (67, 58 in.*lbf) 5.052,4.406 6.219,4.656 1.167,0.25 8 false 6.6 (67, 58 in.*lbf)

Procedure Part Name Code
Z101186

Z101188

Z101187

1 NO. 1 WIRE CLAMP BRACKET - (Click here) - -
2 WIRE CLAMP BRACKET - (Click here) - -
3 NO. 2 RESERVOIR HOSE - (Click here) - -
4 NO. 1 RESERVOIR HOSE - (Click here) - -

V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) - -

C447624N03
5.667,3.667 6.417,3.833 0.75,0.167 5.625,3.625 6.458,3.875 0.833,0.25 3.333,2.698 3.333,1.948 3.333,1.948 3.5,1.948 false 4.5,3.25 4.5,3.583 4.5,3.583 4.333,3.583 false 5.042,2.448 5.042,1.448 5.042,1.448 4.708,1.448 false 0.979,2.375 0.979,1.875 0.979,1.875 0.813,1.875 false 2.146,1.281 2.146,0.615 2.146,0.615 2.396,0.615 false 4.917,3.094 4.917,3.51 4.917,3.51 5.083,3.51 false 4.667,2.5 4.667,2.083 4.667,2.083 4.5,2.083 false 6.75,2.833 6.75,3.333 6.75,3.333 6.583,3.333 false 5.49,1.854 5.49,0.938 5.49,0.938 5.24,0.938 false 5.5,3 5.5,3.75 5.5,3.75 5.667,3.75 false 5.917,1.208 5.917,0.875 5.917,0.875 6.25,0.875 false 6.083,2 5.833,2 5.833,2 5.833,2.25 false 3.76,1.823 4.427,2.24 0.667,0.417 18 false 5 3.552,1.906 3.802,2.156 0.25,0.25 10 false ● 4.177,3.458 4.427,3.792 0.25,0.333 18 false 6 4.521,1.333 5.188,1.75 0.667,0.417 18 false 7 4.344,1.417 4.594,1.667 0.25,0.25 10 false ● 0.604,1.75 1.271,2.167 0.667,0.417 18 false 8 2.792,0.5 3.458,0.917 0.667,0.417 18 false 9 5.135,3.458 5.385,3.708 0.25,0.25 10 false *1 6.406,3.271 6.656,3.521 0.25,0.25 10 false ● 6.417,1.917 7.083,2.333 0.667,0.417 18 false 10 6.302,0.75 6.802,1.167 0.5,0.417 18 false 11 4.927,0.813 5.594,1.229 0.667,0.417 18 false 12 5.594,2.813 6.01,3.063 0.417,0.25 10 false x 4 4.333,2.031 4.583,2.281 0.25,0.25 10 false *1 5.719,3.688 6.469,4.021 0.75,0.333 8 false 12.7 (130, 9)

Procedure Part Name Code
Z101186

Z101188

Z101187

5 BRAKE MASTER CYLINDER GASKET 44785D - - -
6 BRAKE BOOSTER BRACKET - - - -
7 BRAKE MASTER CYLINDER GASKET 44785D (Click here) - -
8 BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY 47210L (Click here) - -
9 FRONT COMPARTMENT MAIN WIRE 82111C (Click here) - -
10 PUSH ROD PIN 47264A (Click here) - -
11 STOP LIGHT SWITCH ASSEMBLY 84340 - - -
12 BRAKE PEDAL RETURN SPRING 47101A (Click here) - -

*1 BOOSTER BRACKET STOPPER RING
(The booster bracket stopper ring is used as a jig during assembly at the factory.When installing the brake booster assembly, it is not necessary to install a booster bracket stopper ring.)
- -
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) ● Non-reusable part
V100135

Lithium soap base glycol grease - -

C447300N04
5.625,3.885 6.708,4.052 1.083,0.167 6.438,2.104 7.104,2.271 0.667,0.167 5.969,1.083 6.969,1.25 1,0.167 4.083,3.833 4.083,4.167 4.083,4.167 4.5,4.167 false 4.083,1.583 4.083,0.75 4.083,0.75 4.5,0.75 false 1.667,3.896 1.667,3.229 1.667,3.229 2.083,3.229 false 5.75,1.896 5.75,2.563 5.75,2.563 6.083,2.563 false 5.281,3.625 5.281,3.958 5.281,3.958 5.615,3.958 false 6.271,2.021 6.271,2.188 6.271,2.188 6.438,2.188 false 6.052,0.917 6.469,0.917 6.469,0.917 6.469,1.083 false 2.135,3.104 2.625,3.521 0.49,0.417 18 false 16 4.552,4.042 5.063,4.448 0.51,0.406 18 false 15 4.552,0.615 5.052,1.021 0.5,0.406 18 false 14 6.135,2.448 6.635,2.885 0.5,0.438 18 false 13 4.646,2.302 4.979,2.552 0.333,0.25 10 false x 2 5.375,3.521 5.708,3.771 0.333,0.25 10 false x 2 5.688,3.906 6.771,4.24 1.083,0.333 8 false 9.8 (100, 87 in.*lbf) 6.49,2.125 7.156,2.375 0.667,0.25 8 false 10 (102, 7) 6.021,1.104 7.031,1.438 1.01,0.333 8 false 6.0 (61, 53 in.*lbf)

Procedure Part Name Code
Z101186

Z101188

Z101187

13 NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY 55308B - - -
14 NO. 2 HEATER TO REGISTER DUCT 55844 - - -
15 AIR DUCT SUB-ASSEMBLY - - - -
16 LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 73900 - - -

V100146

N*m (kgf*cm, ft.*lbf): Specified torque - -

C447630N02
2.5,0.667 2.917,0.667 false 6.365,0.667 6.76,0.667 false 6.344,1.042 6.74,1.042 false 6.365,0.25 6.781,0.25 false 6.354,1.417 6.75,1.417 false 2.208,0.542 2.708,0.875 0.5,0.333 18 false 17 5.667,0.542 6.542,0.896 0.875,0.354 18 false 18, 21 6.052,0.906 6.469,1.229 0.417,0.323 18 false 19 6.083,0.125 6.583,0.458 0.5,0.333 18 false 24 4.375,1.292 6.427,1.667 2.052,0.375 18 false 20, 22, 23, 25, 26

Procedure Part Name Code
Z101186

Z101188

Z101187

17 BRAKE ACTUATOR WITH BRACKET - - - -
18 FILL RESERVOIR WITH BRAKE FLUID - - - -
19 CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL - - - -
20 UPDATE ECU SECURITY KEY - - - (Click here)
21 BLEED BRAKE SYSTEM - - (Click here) -
22 INSPECT AND ADJUST BRAKE PEDAL - - - (Click here)
23 PERFORM CALIBRATION - - - (Click here)
24 CHECK AND CLEAR DTC - - - -
25 INSPECT SRS WARNING LIGHT - - - (Click here)
26 INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL - - - (Click here)

CAUTION / NOTICE / HINT

NOTICE:
C447299C01
2.25,0.667 2.25,0.417 2.25,0.417 2.5,0.417 false 2.552,1.833 2.719,1.833 false 2.188,1.5 2.604,1.417 2.604,1.417 2.854,1.417 true 0.792,0.417 1.042,0.417 false 0.75,1.5 1.083,1.5 false 0.729,0.833 1.063,0.833 false 1.75,1.021 1.917,0.271 1.917,0.271 2.083,0.271 true 0.938,1.833 1.271,1.833 false 2.542,0.365 2.792,0.531 0.25,0.167 10 false *a 0.552,0.781 0.802,0.948 0.25,0.167 10 false *b 2.771,1.781 3.021,2.031 0.25,0.25 10 false *c 2.896,1.375 3.229,1.708 0.333,0.333 10 false *d 0.604,0.365 0.854,0.615 0.25,0.25 10 false *e 0.583,1.448 0.917,1.698 0.333,0.25 10 false *f 2.135,0.219 2.385,0.469 0.25,0.25 10 false *g 0.75,1.781 1.083,2.031 0.333,0.25 10 false *h
*a No. 1 Skid Control ECU
*b No. 1 Reservoir Hose and No. 2 Reservoir Hose
*c Master Cylinder Push Rod Clevis
*d Boot
*e Brake Master Cylinder Reservoir
*f No. 1 Brake Actuator Tube
*g No. 1 Wire Clamp Bracket
*h Brake Booster with Accumulator Pump Assembly


Do not carry the brake booster with master cylinder assembly by the parts shown in the illustration.


PROCEDURE

Hide 1.INSTALL NO. 1 WIRE CLAMP BRACKET

Z101186

HINT:

Perform this procedure only when replacement of the No. 1 wire clamp bracket is necessary.



a.
C447297N01
0.583,0.198 1.333,0.531 0.75,0.333 18 false i

i.

Using a 5 mm long hexagon socket wrench, install the No. 1 wire clamp bracket with the bolt.

Torque:
6.6 N*m (67 kgf*cm, 58 in.*lbf)



Hide 2.INSTALL WIRE CLAMP BRACKET

Z101186

HINT:

Perform this procedure only when replacement of the wire clamp bracket is necessary.



a.
C447298N01
0.583,0.219 1.333,0.719 0.75,0.5 18 false i

i.

Using a 5 mm long hexagon socket wrench, install the wire clamp bracket with the bolt.

Torque:
6.6 N*m (67 kgf*cm, 58 in.*lbf)



Hide 3.INSTALL NO. 2 RESERVOIR HOSE

Z101186

HINT:

Perform this procedure only when replacement of the No. 2 reservoir hose is necessary.



a.
C447296C01
3.271,4.323 3.354,4.49 3.354,4.49 3.854,4.49 true 3.167,4.313 3.333,4.646 3.333,4.646 3.583,4.646 true 2.083,0.438 2.333,0.271 2.333,0.271 2.5,0.271 true 2.125,0.583 2.458,0.583 true 1.938,1.74 2.104,1.573 2.104,1.573 2.271,1.573 true 5.906,3.896 5.823,3.479 5.823,3.479 5.656,3.479 true 5.031,3.406 5.365,3.656 0.333,0.25 10 false *a 1,1.458 1.5,1.792 0.5,0.333 10 false *b 3.635,4.615 3.885,4.781 0.25,0.167 10 false *c 3.906,4.438 4.156,4.604 0.25,0.167 10 false *d 1.208,1.688 1.458,1.854 0.25,0.167 10 false *e 1.219,1.969 1.469,2.219 0.25,0.25 10 false *f 6.302,3.75 6.635,4 0.333,0.25 10 false *g 0.583,0.208 0.917,0.542 0.333,0.333 18 false i 2.25,1.156 2.417,1.323 0.167,0.167 10 true B 2.5,4.208 2.667,4.375 0.167,0.167 10 true A 2.552,0.219 2.802,0.385 0.25,0.167 10 false *d 2.5,0.531 2.75,0.698 0.25,0.167 10 false *c 2.323,1.521 2.573,1.688 0.25,0.167 10 false *c 5.479,3.417 5.729,3.583 0.25,0.167 10 false *c
*a View A *b View B
*c Paint Mark *d Rib
*e within 40° *f within 70°
*g within 45° - -


i.

Install the No. 2 reservoir hose, and slide the 2 clips to secure it.

NOTICE:
·

Make sure that the paint mark is facing the front of the vehicle (Upper Side).

·

Make sure that the paint mark is outside of the vehicle (Lower Side).

·

Install the clip within the range shown in the illustration.





Hide 4.INSTALL NO. 1 RESERVOIR HOSE

Z101186

HINT:

Perform this procedure only when replacement of the No. 1 reservoir hose is necessary.



a.
C447294C01
5.479,1.75 5.396,1.583 5.396,1.583 5.229,1.583 true 1.458,3.615 1.375,3.448 1.375,3.448 1.208,3.448 true 5.271,0.5 5.104,0.333 5.104,0.333 4.854,0.333 true 4.938,0.615 5.271,0.615 true 4.031,3.75 3.615,3.25 3.615,3.25 3.448,3.25 true 4.052,3.667 3.719,2.917 3.719,2.917 3.469,2.917 true 0.594,0.198 1.094,0.698 0.5,0.5 18 false i 5.417,1.167 5.583,1.333 0.167,0.167 10 true A 4.042,4.313 4.208,4.479 0.167,0.167 10 true B 4.698,1.448 4.948,1.698 0.25,0.25 10 false *a 0.771,3.125 1.104,3.375 0.333,0.25 10 false *b 5.052,1.521 5.385,1.771 0.333,0.25 10 false *c 4.677,0.281 5.01,0.531 0.333,0.25 10 false *d 6.063,1.677 6.396,1.927 0.333,0.25 10 false *e 6.063,2.042 6.396,2.292 0.333,0.25 10 false *f 1.604,3.156 1.948,3.406 0.344,0.25 10 false *g 1.031,3.385 1.365,3.635 0.333,0.25 10 false *c 4.76,0.552 5.094,0.802 0.333,0.25 10 false *c 3.281,2.854 3.469,3.083 0.188,0.229 10 true *d 3.271,3.198 3.458,3.427 0.188,0.229 10 true *c
*a View A *b View B
*c Paint Mark *d Rib
*e within 40° *f within 70°
*g within 45° - -


i.

Install the No. 1 reservoir hose, and slide the 2 clips to secure it.

NOTICE:
·

Make sure that the paint mark is facing the front of the vehicle.

·

Install the clip within the range shown in the illustration.





Hide 44785D 5.INSTALL BRAKE MASTER CYLINDER GASKET

Hide 6.INSTALL BRAKE BOOSTER BRACKET

Hide 44785D 7.INSTALL BRAKE MASTER CYLINDER GASKET

Z101186

HINT:

The booster bracket stopper ring is used as a jig during assembly at the factory.When installing the brake booster assembly, it is not necessary to install a booster bracket stopper ring.



Hide 47200 8.INSTALL BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

a.
C447303N01
0.583,0.208 0.917,0.708 0.333,0.5 18 false i

i.

Install the brake booster with master cylinder assembly with the 4 nuts.

Torque:
12.7 N*m (130 kgf*cm, 9 ft.*lbf)

NOTICE:
·

Do not apply excessive force to the brake lines.

·

Be careful not to allow brake fluid to enter the connector.

·

If installing a new brake booster with master cylinder assembly, do not remove the hole plugs before connecting the brake lines because the brake booster with master cylinder assembly is filled with brake fluid.

·
C447299C01
2.25,0.667 2.25,0.417 2.25,0.417 2.5,0.417 false 2.552,1.833 2.719,1.833 false 2.188,1.5 2.604,1.417 2.604,1.417 2.854,1.417 true 0.792,0.417 1.042,0.417 false 0.75,1.5 1.083,1.5 false 0.729,0.833 1.063,0.833 false 1.75,1.021 1.917,0.271 1.917,0.271 2.083,0.271 true 0.938,1.833 1.271,1.833 false 2.542,0.365 2.792,0.531 0.25,0.167 10 false *a 0.552,0.781 0.802,0.948 0.25,0.167 10 false *b 2.771,1.781 3.021,2.031 0.25,0.25 10 false *c 2.896,1.375 3.229,1.708 0.333,0.333 10 false *d 0.604,0.365 0.854,0.615 0.25,0.25 10 false *e 0.583,1.448 0.917,1.698 0.333,0.25 10 false *f 2.135,0.219 2.385,0.469 0.25,0.25 10 false *g 0.75,1.781 1.083,2.031 0.333,0.25 10 false *h
*a No. 1 Skid Control ECU
*b No. 1 Reservoir Hose and No. 2 Reservoir Hose
*c Master Cylinder Push Rod Clevis
*d Boot
*e Brake Master Cylinder Reservoir
*f No. 1 Brake Actuator Tube
*g No. 1 Wire Clamp Bracket
*h Brake Booster with Accumulator Pump Assembly


Do not carry the brake booster with master cylinder assembly by the parts shown in the illustration.





Hide 82111C 9.CONNECT FRONT COMPARTMENT MAIN WIRE

Z101186

NOTICE:
·

Make sure that the connector is locked securely.

·

Make sure that the connector can be connected smoothly.

·

Do not allow water, oil or dirt to enter the connector.




Hide 47264A 10.INSTALL PUSH ROD PIN

Z101186

Click here(Click here)

Hide 84340 11.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 47101A 12.INSTALL BRAKE PEDAL RETURN SPRING

Z101186

Click here(Click here)

Hide 55308B 13.INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY

Hide 55844 14.INSTALL NO. 2 HEATER TO REGISTER DUCT

Hide 73900 16.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 18.FILL RESERVOIR WITH BRAKE FLUID

Hide 19.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 21.BLEED BRAKE SYSTEM

Hide 22.INSPECT AND ADJUST BRAKE PEDAL

Hide 24. CHECK AND CLEAR DTC

Hide 26. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART