Home › Vehicle Interior › HEATING / AIR CONDITIONING › COOLER EXPANSION VALVE › 2011.12–2014.12
RM2170E _58 Vehicle Interior _057042 HEATING / AIR CONDITIONING _0278131 COOLER EXPANSION VALVE A

HEATING / AIR CONDITIONING  COOLER EXPANSION VALVE  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

When removing the cooler expansion valve by itself, be sure to install a new cooler expansion valve and new bolt for suction pipe sub-assembly.


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM

Hide 2.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Hide 55722C 3.REMOVE INNER COWL TOP TO COWL BRACE (for LHD)

Hide 55722C 4.REMOVE INNER COWL TOP TO COWL BRACE (for RHD)

Hide 55735B 5.REMOVE FRONT AIR SHUTTER SEAL (for LHD)

Hide 55735B 6.REMOVE FRONT AIR SHUTTER SEAL (for RHD)

Hide 55815E 7.REMOVE FRONT NO. 1 VENTILATOR SEAL (for LHD)

Hide 55815E 8.REMOVE FRONT NO. 1 VENTILATOR SEAL (for RHD)

Hide 55701J 9.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

Hide 55701J 10.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

Hide 88515 13.REMOVE COOLER EXPANSION VALVE

a.
E234978

Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.


b.
E234979E03
2.313,1.521 1.667,1.115 true 2.354,1.458 2.583,1.667 0.229,0.208 10 true *a

Temporarily install the bolt for the suction pipe sub-assembly halfway to the cooler expansion valve.

Text in Illustration
*a Bolt for Suction Pipe Sub-assembly


c.
E234980

Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.


d.
E234981E03
1.865,1.104 2.688,0.938 true 2.708,0.854 2.885,1.031 0.177,0.177 10 true *1

Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.

Text in Illustration
*1 No. 1 Cooler Evaporator Sub-assembly