1.RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM
2.REMOVE FRONT BUMPER ASSEMBLY
53289A
3.REMOVE RADIATOR SUPPORT OPENING COVER
53286B
4.REMOVE NO. 2 RADIATOR SIDE AIR SEAL
53285B
5.REMOVE NO. 1 RADIATOR SIDE AIR SEAL
53288B
6.REMOVE RADIATOR SUPPORT EXTENSION LH
53287B
7.REMOVE RADIATOR SUPPORT EXTENSION RH
52611
8.REMOVE FRONT BUMPER ENERGY ABSORBER
53936D
9.REMOVE FRONT END PANEL PROTECTOR LH (w/ Front Spoiler)
52131A
10.REMOVE FRONT BUMPER REINFORCEMENT
53510
11.REMOVE HOOD LOCK ASSEMBLY
53208A
12.REMOVE HOOD LOCK SUPPORT SUB-ASSEMBLY
Disconnect the connector.
Remove the 2 bolts and hood lock support sub-assembly.
53205
13.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
16712
14.REMOVE NO. 2 FAN SHROUD
88711
15.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88706
16.DISCONNECT LIQUID PIPE SUB-ASSEMBLY
Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.
Remove the O-ring from the liquid pipe sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88460
17.REMOVE COOLER CONDENSER ASSEMBLY
Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.
Do not damage the condenser or radiator when removing the cooler condenser assembly.
88467
18.REMOVE NO. 1 COOLER CONDENSER CUSHION
Remove the 4 No. 1 cooler condenser cushions from the cooler condenser assembly.