| When reverse (R) is selected, an image of the area behind the vehicle is not displayed (screen is not black)
|
Proceed to "Reverse Signal Circuit"*1
|
( )
|
| Proceed to "Reverse Signal Circuit"*2
|
( )
|
| Proceed to "Reverse Signal Circuit"*3
|
( )
|
| Navigation receiver assembly*1
|
( )
|
| Radio and display receiver assembly*2*3
|
( )
|
| When reverse (R) is selected, an image of the area behind the vehicle is not displayed (screen is black)
|
Proceed to "Image from Camera for Rear View Monitor is Abnormal"
|
( )
|
| Navigation receiver assembly*1
|
( )
|
| Radio and display receiver assembly*2*3
|
( )
|
| When reverse (R) is not selected, an image of the area behind the vehicle is displayed
|
Proceed to "Reverse Signal Circuit"*1
|
( )
|
| Proceed to "Reverse Signal Circuit"*2
|
( )
|
| Proceed to "Reverse Signal Circuit"*3
|
( )
|
| Navigation receiver assembly*1
|
( )
|
| Radio and display receiver assembly*2*3
|
( )
|
| Rear view monitor display malfunction (distortion of the color/screen) occurs continuously
|
Proceed to "Image from Camera for Rear View Monitor is Abnormal"
|
( )
|
| Navigation receiver assembly*1
|
( )
|
| Radio and display receiver assembly*2*3
|
( )
|
| Rear view monitor display malfunction (distortion of the color/screen) occurs temporarily
|
Check the usage conditions (explain to the customer that the display may be temporarily distorted when the vehicle is close to an object that transmits radio waves, such as a telecommunication tower, an airport or a truck equipped with a transceiver)
|
-
|
| When an image of the area behind the vehicle is displayed, the lines are misaligned (the image from the camera is tilted)
|
Check that the camera is correctly installed
|
( )
|
| Guide lines are not displayed
|
Rear television camera assembly
|
( )
|