Audio Function
Symptom
| Suspected Area
| See page
|
Pressing power switch does not turn on system.
| Proceed to "Pressing Power Switch does not Turn on System"
|
Click here
|
Radio receiver power source circuit
|
Click here
|
Radio receiver assembly
|
Click here
|
Panel switch does not function.
| Steering pad switch circuit
|
Click here
|
Radio receiver assembly
|
Click here
|
No sound can be heard from speakers. (Audio is mute.)
| Radio receiver power source circuit
|
Click here
|
Proceed to "No Sound can be Heard from Speakers"
|
Click here
|
Stereo component amplifier power source circuit*1
|
Click here
|
Speaker circuit
|
Click here
|
Stereo component amplifier assembly*1
|
Click here
|
Radio receiver assembly
|
Click here
|
Sound quality is bad in all modes. (Volume is too low.)
| Proceed to "Sound Quality in All Modes (Low Volume)"
|
Click here
|
Speaker circuit
|
Click here
|
Stereo component amplifier assembly*1
|
Click here
|
Radio receiver assembly
|
Click here
|
ASL does not function.
| Proceed to "Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter"
|
Click here
|
External device sound cannot be heard or sound quality is bad. (Stereo jack is used.)*2
| Radio receiver power source circuit
|
Click here
|
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Radio receiver assembly
|
Click here
|
Abnormal noise occurs.
| Proceed to "Noise occurs"
|
Click here
|
Noise filter
|
Click here
|
Stereo component amplifier assembly*1
|
Click here
|
Radio receiver assembly
|
Click here
|
Radio broadcast cannot be received or poor reception.
| Proceed to "Radio Broadcast cannot be Received or Poor Reception"
|
Click here
|
CD cannot be inserted/played or CD is ejected right after insertion.
| Radio receiver power source circuit
|
Click here
|
Proceed to "CD cannot be Inserted / Played or CD is Ejected Right After Insertion"
|
Click here
|
CD cannot be ejected.
| Radio receiver power source circuit
|
Click here
|
Proceed to "CD cannot be Ejected"
|
Click here
|
Sound quality is bad only when CD is played. (Volume is too low.)
| Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)"
|
Click here
|
CD sound skips.
| Proceed to "CD Sound Skips"
|
Click here
|
Radio receiver cannot be illuminated at night.
| Illumination circuit
|
Click here
|
Radio receiver assembly
|
Click here
|
"Bluetooth" Function*3
Symptom
| Suspected Area
| See page
|
Cellular phone registration failure, phone directory transfer failure.
| Proceed to "Cellular Phone Registration Failure, Phone Directory Transfer Failure"
|
Click here
|
Cellular phone cannot send/receive.
| Proceed to "Cellular Phone cannot Send/Receive"
|
Click here
|
Steering pad switch circuit
|
Click here
|
Radio receiver assembly
|
Click here
|
Cellular phone cannot call in a certain place.
| Proceed to "Cannot Call in a Certain Place"
|
Click here
|
Other callers voice cannot be heard, is too quiet, or distorted.
| Proceed to "The Other Caller`s Voice cannot be Heard, is too Quiet, or Distorted"
|
Click here
|
Telephone microphone assembly (w/ Sliding Roof)
|
Click here
|
Telephone microphone assembly (w/o Sliding Roof)
|
Click here
|
Radio receiver assembly
|
Click here
|
Other caller cannot hear your voice, or your voice is too quiet or distorted.
| Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Radio Receiver"
|
Click here
|
Telephone microphone assembly (w/ Sliding Roof)
|
Click here
|
Telephone microphone assembly (w/o Sliding Roof)
|
Click here
|
Radio receiver assembly
|
Click here
|