Home › TRANSMISSION ยท CLUTCH › CLUTCH SYSTEM (for 3ZR-FAE)

CLUTCH SYSTEM (for 3ZR-FAE) > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


Clutch System 
Symptom
Suspected Area
See page
Clutch grabs/chatters
Engine mounting (Loose)
-
Clutch disc (Excessive runout)
Click here
Clutch disc (Oily)
Click here
Clutch disc (Worn out)
Click here
Clutch disc torsion spring (Damaged)
Click here
Clutch disc (Glazed)
Click here
Diaphragm spring (Out of tip alignment)
Click here
Clutch pedal spongy
Clutch line (Air in line)
Click here
Master cylinder cup (Damaged) (for LHD)
Click here
Master cylinder cup (Damaged) (for RHD)
Click here
Clutch release with bearing cylinder assembly (Damaged)
Click here
Clutch noisy
Clutch release with bearing cylinder assembly (Worn, dirty or damaged)
Click here
Clutch disc torsion spring (Damaged)
Click here
Clutch slips
Clutch pedal (Free play out of adjustment) (for LHD)
Click here
Clutch pedal (Free play out of adjustment) (for RHD)
Click here
Clutch disc (Oily)
Click here
Clutch disc (Worn out)
Click here
Diaphragm spring (Damaged)
Click here
Pressure plate (Distortion)
Click here
Flywheel (Distortion)
Click here
Clutch does not disengage
Clutch pedal (Free play out of adjustment) (for LHD)
Click here
Clutch pedal (Free play out of adjustment) (for RHD)
Click here
Clutch line (Air in line)
Click here
Master cylinder cup (Damaged) (for LHD)
Click here
Master cylinder cup (Damaged) (for RHD)
Click here
Clutch release with bearing cylinder assembly (Damaged)
Click here
Clutch disc (Out of true)
Click here
Clutch disc (Excessive runout)
Click here
Clutch disc (Lining broken)
Click here
Clutch disc (Dirty or burned)
Click here
Clutch disc (Oily)
Click here
Clutch disc (Lack of spline grease)
Click here