67914
1.REMOVE FRONT DOOR SCUFF PLATE LH
62112
2.REMOVE COWL SIDE TRIM BOARD LH
55318C
3.REMOVE INSTRUMENT SIDE PANEL LH
53601
4.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
55046A
5.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
73900
6.REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY
7.RELEASE PARKING BRAKE PEDAL
8.DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY
17450B
9.REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY (for 3UR-FE)
17450B
10.REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY (for 3UR-FBE)
46410
11.REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY
Remove the adjustment nut and lock nut (labeled A).
Remove the bolt (labeled B) and cable retainer.
Remove the nut (labeled C) and clamp from the body.
Disconnect the clamp (labeled D) from the No. 1 parking brake cable.
Remove the 2 bolts (labeled E) and No. 1 parking brake cable from the inside of the vehicle.
Do not bend and twist the parking brake cable.
12.REMOVE REAR WHEEL LH
13.REMOVE REAR WHEEL RH
14.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH
15.DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH
Use the same procedure for both sides.
42431
16.REMOVE REAR DISC LH
42431
17.REMOVE REAR DISC RH
Use the same procedure for both sides.
18.REMOVE PARKING BRAKE SHOE RETURN SPRING LH
19.REMOVE PARKING BRAKE SHOE RETURN SPRING RH
Use the same procedure for both sides.
46580
20.REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH
46540
21.REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY RH
Use the same procedure for both sides.
46590
22.REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH
46550
23.REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY RH
Use the same procedure for both sides.
24.REMOVE PARKING BRAKE SHOE LEVER LH
25.REMOVE PARKING BRAKE SHOE LEVER RH
Use the same procedure for both sides.
46301A
26.REMOVE INTERMEDIATE LEVER TENSION SPRING
Remove the tension spring.
46458A
27.REMOVE NO. 2 CABLE RETAINER
Remove the bolt and cable retainer.
46430
28.REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY
Disconnect the No. 3 parking brake cable from the intermediate lever.
Remove the 4 bolts and disconnect the No. 3 parking brake cable from the frame.
Do not bend and twist the parking brake cable.
Remove the bolt and No. 3 parking brake cable from the rear axle carrier.
46420
29.REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY
The No. 2 parking brake cable bolt locations are symmetric to those of the No. 3 parking brake cable, with the exception of the locations indicated with "*A".
Disconnect the No. 2 parking brake cable from the intermediate lever.
Remove the 8 bolts and disconnect the No. 2 parking brake cable from the frame.
Remove the bolt and the No. 2 parking brake cable from the rear axle carrier.