Home › Engine / Hybrid System › B58 (ENGINE MECHANICAL) › OIL FILTER BRACKET
RM3650E _51 Engine / Hybrid System _080179 B58 ENGINE MECHANICAL _0388905 OIL FILTER BRACKET A

B58 ENGINE MECHANICAL  OIL FILTER BRACKET  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

Hide 15671 2.INSTALL OIL FILTER BRACKET

HINT:

To provide a better overview: Illustration of surrounding parts in removed state.


a.
A441327

Clean the sealing surfaces on the engine block.

NOTICE:
·

Damage to the surface.

The use of metal-cutting tools (e.g. sandpaper) to clean the surfaces can damage them and lead to leaks or engine damage.

-

Do not use any metal-cutting tools.





b.

Replace oil filter bracket gasket (1) to (5).


c.
A441748

Insert and install the oil filter bracket (7) from the top.


d.

Tighten E10 bolts in the order (1) to (6).

i.

The bolts (2) and (6) must be tightened from the bottom.

Torque:
1st : 4.0 N*m (41 kgf*cm, 35 in.*lbf)
2nd : 10 N*m (102 kgf*cm, 7 ft.*lbf)



e.
A441747

Clip in the engine wire (1).


f.
A441746

Clip in the alternator wire and engine wire (1).


g.
A441745

Connect and lock the No. 2 radiator hose (1).

HINT:

Make sure that the connections are locked correctly. The locks must engage audibly.



Hide 15620 4.INSTALL OIL FILTER CAP ASSEMBLY

Hide 12180E 6.INSTALL OIL FILLER CAP ASSEMBLY

Hide 51410 7.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 51219 8.INSTALL FRONT SUSPENSION MEMBER LOWER PROTECTOR

Hide 9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 10.ADD ENGINE COOLANT (for High Pressure)

Hide 12.INSPECT FOR ENGINE OIL LEAK