Home › Engine / Hybrid System › 1UR-FE CHARGING › GENERATOR
RM27M0U _51 Engine / Hybrid System _049146 1UR-FE CHARGING _0234376 GENERATOR A

1UR-FE CHARGING  GENERATOR  INSTALLATION  


PROCEDURE

Hide 27020 1.INSTALL GENERATOR ASSEMBLY

a.
A216790

Install the generator with the 3 bolts and nut.

Torque:
43 N*m (438 kgf*cm, 32 ft.*lbf)


b.
A215539

Install the harness bracket to the generator with the bolt.

Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)


c.

Connect the generator connector.


d.

Connect the generator wire with the nut.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


e.

Install the terminal cap.


Hide 3.CONNECT POWER STEERING OIL PRESSURE SWITCH CONNECTOR

Hide 53736 4.INSTALL FRONT FENDER APRON SEAL RH

Hide 16361A 6.INSTALL FAN AND GENERATOR V BELT

a.

Install the fan and generator V belt (See page Engine / Hybrid System>1UR-FE ENGINE MECHANICAL>DRIVE BELT>INSTALLATION).


Hide 28800J 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL