Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD GLASS › from 2021.07
RM3700E _59 Vehicle Exterior _092998 WINDOW / GLASS _0438346 WINDSHIELD GLASS A

WINDOW / GLASS  WINDSHIELD GLASS  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
B619106N02
1.917,2.583 3.25,4 1.333,1.417 0.5,2.167 1.833,3 1.333,0.833 1.573,0.677 1.99,0.677 false 3.667,0.542 4,0.542 false 5.135,2.115 5.531,2.115 false 4.708,4.146 5.125,4.146 false 3.635,2.844 3.635,3.26 false 3.344,1.542 3.802,1.542 false 5.823,0.615 6.24,0.615 false 6.708,1.573 6.542,1.573 6.542,1.573 6.438,1.948 false 2.333,2.979 2.75,2.979 false 2.469,3.729 2.885,3.729 false 1.125,4.063 1.542,4.063 false 0.969,2.615 1.385,2.615 false 4.063,0.458 4.708,0.667 0.646,0.208 10 false ● 4.167,1.396 4.531,1.75 0.365,0.354 18 false 9 1.375,0.51 1.74,0.865 0.365,0.354 18 false 7 6.604,0.427 6.969,0.781 0.365,0.354 18 false 10 4.906,1.979 5.271,2.333 0.365,0.354 18 false 8 4.51,3.99 4.875,4.344 0.365,0.354 18 false 6 6.75,1.469 7.031,1.729 0.281,0.26 10 false ● 3.573,3.281 3.938,3.635 0.365,0.354 18 false 5 2.833,2.844 3.198,3.198 0.365,0.354 18 false 3 2.969,3.563 3.333,3.917 0.365,0.354 18 false 2 1.615,3.927 1.979,4.281 0.365,0.354 18 false 1 1.958,2.594 2.333,2.833 0.375,0.24 12 false *B 0.76,2.458 1.125,2.813 0.365,0.354 18 false 4 0.542,2.177 0.917,2.417 0.375,0.24 12 false *A

Procedure Part Name Code
Z101186

Z101188

Z101187

1 WINDSHIELD WIPER MOTOR AND LINK - - - -
2 FORWARD RECOGNITION CAMERA 8646C - - -
3 FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY 86401 - - -
4 RAIN SENSOR 89943 - - -
5 INNER REAR VIEW MIRROR ASSEMBLY 87810 - - -
6 FRONT DOOR OPENING TRIM WEATHERSTRIP LH 62312B - - -
7 FRONT DOOR OPENING TRIM WEATHERSTRIP RH 62311B - - -
8 FRONT PILLAR GARNISH LH 62212 (Click here) - -
9 FRONT PILLAR GARNISH RH 62211 (Click here) - -
10 MAP LIGHT ASSEMBLY 81260A (Click here) - -

*A w/ Rain Sensor *B w/ Pre-collision System
● Non-reusable part - -

B590414N03
1.844,2.094 2.104,1.938 2.104,1.938 2.271,1.938 false 5.906,3.292 6.229,3.135 6.229,3.135 6.375,3.135 false 1.875,2.531 2.219,2.531 false 2.667,3.552 3.083,3.552 false 5.708,3.677 6.125,3.677 false 5.313,4.302 5.313,3.854 false 0.844,2.573 0.99,2.573 0.99,2.573 1.427,2.646 false 4.344,1.5 4.781,0.833 4.781,0.833 4.958,0.833 false 2.625,4.344 2.833,4.344 2.833,4.344 2.948,4.01 false 1.823,5.083 1.958,5.083 1.958,5.083 2.094,4.906 false 2.625,5.083 2.906,5.083 false 5.375,4.313 5.792,4.667 0.417,0.354 18 false 15 6.458,3.542 6.875,3.896 0.417,0.354 18 false 15 6.708,2.979 7.042,3.333 0.333,0.354 18 false 16 5.313,0.656 5.729,1.01 0.417,0.354 18 false 17 2.573,2.323 2.99,2.677 0.417,0.354 18 false 15 2.625,1.792 3.042,2.146 0.417,0.354 18 false 16 0.531,2.448 0.948,2.802 0.417,0.354 18 false 15 3.104,3.427 3.521,3.781 0.417,0.354 18 false 12 2.344,4.208 2.75,4.594 0.406,0.385 18 false 11 2.938,4.948 3.354,5.302 0.417,0.354 18 false 13 2.219,3.875 2.531,4.073 0.313,0.198 10 false x2 3.385,4.542 3.698,4.74 0.313,0.198 10 false x2 1.521,4.948 1.938,5.302 0.417,0.354 18 false 14

Procedure Part Name Code
Z101186

Z101188

Z101187

11 VISOR ASSEMBLY LH 74320 - - -
12 VISOR ASSEMBLY RH 74310 - - -
13 VISOR HOLDER LH 74348C - - -
14 VISOR HOLDER RH 74348B - - -
15 ASSIST GRIP COVER 74612 (Click here) - -
16 ASSIST GRIP ASSEMBLY 74610S (Click here) - -
17 ROOF HEADLINING ASSEMBLY 63310 (Click here) - -

B586186N06
1,0.167 6.083,1.167 5.083,1 2.135,0.823 2.479,0.823 false 3.667,1.167 3.667,0.167 false 2.438,0.542 2.813,0.542 false 5.031,0.844 5.448,0.844 false 4.01,4.292 4.375,4.292 false 5.635,2 5.635,1.625 false 0.938,4.896 0.938,5.313 false 1.052,0.229 1.427,0.469 0.375,0.24 12 false *A 3.729,0.219 4.104,0.458 0.375,0.24 12 false *B 2.979,0.521 3.292,0.719 0.313,0.198 10 false x2 2.677,0.833 2.99,1.031 0.313,0.198 10 false x2 5.625,0.833 5.938,1.031 0.313,0.198 10 false x2 2.115,0.344 2.531,0.698 0.417,0.354 18 false 23 1.76,0.688 2.177,1.042 0.417,0.354 18 false 22 4.698,0.698 5.115,1.052 0.417,0.354 18 false 21 1.917,0.396 2.167,0.646 0.25,0.25 10 false ● 1.583,0.75 1.833,1 0.25,0.25 10 false ● 4.5,0.771 4.75,1.021 0.25,0.25 10 false ● 1.063,5.292 1.479,5.646 0.417,0.354 18 false 20 4.688,4.125 5.104,4.479 0.417,0.354 18 false 18 5.792,1.99 6.208,2.344 0.417,0.354 18 false 19 5.656,2.021 5.906,2.271 0.25,0.25 10 false ● 0.917,5.344 1.167,5.594 0.25,0.25 10 false ●

Procedure Part Name Code
Z101186

Z101188

Z101187

18 WINDSHIELD GLASS 56111 (Click here) - -
19 WINDSHIELD OUTSIDE MOULDING 75533G (Click here) - -
20 WINDOW GLASS ADHESIVE DAM 56117A (Click here) - -
21 NO. 1 WINDSHIELD GLASS STOPPER 56115A (Click here) - -
22 NO. 2 WINDSHIELD GLASS STOPPER 56116C (Click here) - -
23 NO. 1 WINDSHIELD GLASS STOPPER 56115A (Click here) - -

*A for 2-piece Type *B for 1-piece Type
● Non-reusable part - -

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during the windshield glass removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part Necessary Procedure Effect/Inoperative Function when Necessary Procedures are not Performed Link
Windshield glass Adjust forward recognition camera
·

Dynamic Radar Cruise Control System

·

Front Camera System

·

Lane Tracing Assist System

·

Road Sign Assist System

·

Pre-collision System

·

Automatic High Beam System

·

Adaptive High Beam System


One Time Recognition:
(Click here)
Sequential Recognition:
(Click here)
Driving Adjustment:
(Click here)

NOTICE:

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the front camera system, adaptive high beam system, pre-collision system, dynamic radar cruise control system, lane tracing assist system, road sign assist system or automatic high beam system may not operate properly due to a difference in the transmissivity or black ceramic border.


PROCEDURE

Hide 1.REMOVE WINDSHIELD WIPER MOTOR AND LINK

Hide 8646C 2.REMOVE FORWARD RECOGNITION CAMERA (w/ Pre-collision System)

Hide 86401 3.REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY (w/ Pre-collision System)

Hide 89943 4.REMOVE RAIN SENSOR (w/ Rain Sensor)

Hide 87810 5.REMOVE INNER REAR VIEW MIRROR ASSEMBLY

Hide 62312B 6.SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

a.
B605909


Hide 62311B 7.SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

a.

Use the same procedure as for the LH side.


Hide 62212 8.REMOVE FRONT PILLAR GARNISH LH

Z101186

Click here(Click here)

Hide 62211 9.REMOVE FRONT PILLAR GARNISH RH

a.

Use the same procedure as for the LH side.


Hide 81260A 10.REMOVE MAP LIGHT ASSEMBLY

Z101186

Click here(Click here)

Hide 74320 11.REMOVE VISOR ASSEMBLY LH

Hide 74310 12.REMOVE VISOR ASSEMBLY RH

a.

Use the same procedure as for the LH side.


Hide 74348C 13.REMOVE VISOR HOLDER LH

Hide 74348B 14.REMOVE VISOR HOLDER RH

a.

Use the same procedure as for the LH side.


Hide 74612 15.REMOVE ASSIST GRIP COVER

Z101186

Click here(Click here)

Hide 74610S 16.REMOVE ASSIST GRIP ASSEMBLY

Z101186

Click here(Click here)

Hide 63310 17.SEPARATE ROOF HEADLINING ASSEMBLY

a.
B586188N01
0.448,0.104 0.729,0.458 0.281,0.354 18 false i

i.

Slightly lower the front section of the roof headlining so that the windshield glass can be removed.

NOTICE:

Do not damage the roof headlining or vehicle interior.




Hide 56111 18.REMOVE WINDSHIELD GLASS

Z101186

NOTICE:
·

To prevent the windshield glass rom falling when performing this operation, be sure to hold the windshield glass using suction cups.

·

The No. 1 windshield glass stoppers and No. 2 windshield glass stoppers are installed to the windshield glass as shown in the illustration. Be careful not to damage the windshield glass when cutting the adhesive.



HINT:

Depending on the vehicle, either 1-piece type or 2-piece type stoppers may be present.



a.
B586189C01
5.063,1.396 4.656,1.302 4.656,1.302 5.188,1.208 true 0.917,0.271 1.229,0.427 0.313,0.156 10 false *a 4.24,0.292 4.552,0.448 0.313,0.156 10 false *b 0.427,0.104 0.708,0.458 0.281,0.354 18 false i 4.406,1.208 4.625,1.396 0.219,0.188 10 true *c
*a When using a new Windshield Glass *b When reusing the Windshield Glass
*c Matchmark - -


i.

Apply protective tape to the area around the installation position of the windshield glass sub-assembly on the vehicle body to prevent it from being scratched as shown in the illustration.

NOTICE:

When reusing the windshield glass, place matchmarks on the windshield glass sub-assembly and vehicle body at the locations indicated in the illustration.




b.

for Cold Area Specification Vehicles:

B605897

i.

Disconnect the connector.



c.
B586191C01
2.063,1.083 3.198,0.854 true 4.938,1.031 3.948,0.979 true 0.5,0.135 0.781,0.49 0.281,0.354 18 false i 5.021,0.958 5.24,1.188 0.219,0.229 10 true *a 1.823,1.021 2.042,1.219 0.219,0.198 10 false *a
*a Suction Cup - -


i.

Install the suction cups to the windshield glass sub-assembly.



d.
B586192C01
4.281,0.219 4.74,0.104 true 2.927,0.229 2.25,0.156 true 3.417,1.323 3.708,1.094 true 4.771,0.031 5.083,0.188 0.313,0.156 10 false *1 3.74,0.99 3.938,1.146 0.198,0.156 10 true *a 2.042,0.083 2.354,0.24 0.313,0.156 10 false *1 0.51,0.156 0.854,0.51 0.344,0.354 18 false i
*1 Windshield Glass Stopper - -
*a Piano Wire - -


i.

Cut the adhesive by the below procedure.

1. Pass a piano wire between the vehicle body and windshield glass sub-assembly from the interior.

2. Tie both wire ends to wooden blocks or similar objects that can serve as handles.

3. Cut the adhesive by pulling the piano wire around the windshield glass sub-assembly.

NOTICE:
·

When separating the windshield glass sub-assembly, be careful not to damage the paint or interior and exterior ornaments.

·

To prevent the safety pad from being scratched when removing the windshield glass sub-assembly, place a plastic sheet between the piano wire and safety pad.

·

Be careful not to damage the front window inner center moulding.





e.
B590192C01
1.365,1.021 1.635,0.844 false 4.719,0.677 4.99,0.563 false 5.042,1.031 5.26,0.906 false 0.948,0.167 1.25,0.448 0.302,0.281 12 false *A 4.042,0.146 4.354,0.375 0.313,0.229 12 false *B 1.167,0.958 1.417,1.156 0.25,0.198 10 false *1 4.865,0.99 5.177,1.146 0.313,0.156 10 false *2 4.542,0.656 4.792,0.854 0.25,0.198 10 false *1 0.479,0.135 0.76,0.49 0.281,0.354 18 false i
*A for 1-piece Type *B for 2-piece Type
*1 No. 1 Windshield Glass Stopper *2 No. 2 Windshield Glass Stopper


i.

Using suction cups, disengage the windshield glass stoppers to remove the windshield glass sub-assembly.

NOTICE:
·

Be careful not to drop the windshield glass sub-assembly.

·

Leave as much adhesive on the vehicle body as possible when removing the windshield glass sub-assembly.





Hide 75533G 19.REMOVE WINDSHIELD OUTSIDE MOULDING

a.

When reusing the windshield glass sub-assembly:

B590214C01
0.521,0.146 0.802,0.5 0.281,0.354 18 false i 2.292,0.083 2.573,0.438 0.281,0.354 10 false *a
*a Back Side of Windshield Glass Sub-assembly - -


i.

Using a scraper, remove the windshield outside moulding.

NOTICE:
·

Be careful not to damage the windshield glass sub-assembly.

·

Be sure to replace the windshield outside moulding with a new one.





Hide 56117A 20.REMOVE WINDOW GLASS ADHESIVE DAM

a.

When reusing the windshield glass sub-assembly:

B586193C01
2.26,0.094 2.573,0.292 0.313,0.198 10 false *a 0.51,0.115 0.792,0.469 0.281,0.354 18 false i
*a Back Side of Windshield Glass Sub-assembly - -


i.

Using a scraper, remove the window glass adhesive dam.

NOTICE:
·

Be careful not to damage the windshield glass sub-assembly.

·

Be sure to replace the window glass adhesive dam with a new one.





Hide 56115A 21.REMOVE NO. 1 WINDSHIELD GLASS STOPPER (for 1-piece Type)

a.

When reusing the windshield glass sub-assembly:

B586194C01
2.229,0.063 2.542,0.26 0.313,0.198 10 false *a 0.5,0.146 0.781,0.5 0.281,0.354 18 false i
*a Back Side of Windshield Glass Sub-assembly - -


i.

Using a scraper, remove the 2 No. 1 windshield glass stoppers.

NOTICE:
·

Be careful not to damage the windshield glass sub-assembly.

·

Be sure to replace the No. 1 windshield glass stoppers with new ones.





Hide 56116C 22.REMOVE NO. 2 WINDSHIELD GLASS STOPPER (for 2-piece Type)

a.

When reusing the windshield glass sub-assembly:

B586195C01
2.271,0.063 2.583,0.26 0.313,0.198 10 false *a 0.49,0.135 0.771,0.49 0.281,0.354 18 false i
*a Back Side of Windshield Glass Sub-assembly - -


i.

Using a scraper, remove the 2 No. 2 windshield glass stoppers.

NOTICE:
·

Be careful not to damage the windshield glass sub-assembly.

·

Be sure to replace the No. 2 windshield glass stoppers with new ones.





Hide 56115A 23.REMOVE NO. 1 WINDSHIELD GLASS STOPPER (for 2-piece Type)

a.
B586196N01
0.49,0.146 0.771,0.5 0.281,0.354 18 false i

i.

Remove the 2 No. 1 windshield glass stoppers.

NOTICE:

Be sure to replace the No. 1 windshield glass stoppers with new ones.