Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION MEMBER › 2016.10–2017.10
RM30M0E _53 Suspension _017095 FRONT SUSPENSION _0090100 FRONT SUSPENSION MEMBER A

FRONT SUSPENSION  FRONT SUSPENSION MEMBER  REMOVAL  


PROCEDURE

Hide 1.PLACE FRONT WHEELS FACING STRAIGHT AHEAD

Hide 2.REMOVE FRONT WHEELS

Hide 3.SECURE STEERING WHEEL

a.
C286602

Secure the steering wheel with the seat belt in order to prevent it from rotating.

HINT:

This operation is useful to prevent damage to the spiral cable.



Hide 45259A 4.REMOVE COLUMN HOLE COVER SILENCER SHEET

Hide 45209 5.SEPARATE STEERING SLIDING YOKE SUB-ASSEMBLY

Hide 45025D 6.SEPARATE NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

a.
C287412E01
1.042,1.813 1.198,2.01 0.156,0.198 10 true A 2.083,0.198 2.24,0.396 0.156,0.198 10 true B

Disengage clip A and clip B from the body and separate the No. 1 steering column hole cover sub-assembly.

NOTICE:

Do not damage clip B.



Hide 51451A 7.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)

Hide 51405A 8.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)

Hide 48819A 9.REMOVE FRONT STABILIZER BOLT LH

Hide 48819A 10.REMOVE FRONT STABILIZER BOLT RH

HINT:

Use the same procedure described for the LH side.


Hide 45047 11.SEPARATE TIE ROD END SUB-ASSEMBLY LH

Hide 45046 12.SEPARATE TIE ROD END SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 48069 13.SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

Hide 48068 14.SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 57533B 15.REMOVE FRONT FLOOR CENTER BRACE (for Sedan)

Hide 57533B 16.REMOVE FRONT FLOOR CENTER BRACE (for Hatchback)

Hide 17410 17.REMOVE FRONT EXHAUST PIPE ASSEMBLY (for Sedan)

Hide 17410 18.REMOVE FRONT EXHAUST PIPE ASSEMBLY (for Hatchback)

Hide 51201 19.REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

a.
C249869

Remove the bolt and separate the engine moving control rod.


b.
C282490C01
2.552,1.208 2.76,1.208 false 0.969,1.156 1.177,1.156 false 1.083,0.448 1.531,1.156 true 1.688,0.542 2.094,1.156 true 2.635,1.427 3.01,1.708 false 2.781,1.135 3.094,1.292 0.313,0.156 10 false *a 3.063,1.625 3.313,1.792 0.25,0.167 10 false *b 0.813,1.031 1.042,1.188 0.229,0.156 10 true *a 0.906,0.344 1.083,0.51 0.177,0.167 10 true *a 1.51,0.427 1.688,0.594 0.177,0.167 10 true *a
*a Plate Lift Attachment
*b Engine Lifter
V100135

Front of the Vehicle
V100155

Attachment Placement Positions


Place wooden blocks or plate lift attachments in the positions shown in the illustration and set an engine lifter underneath the front suspension crossmember sub-assembly.

NOTICE:
·

Place the wooden blocks or plate lift attachments so that the front suspension crossmember sub-assembly is level.

·

As the front suspension crossmember sub-assembly is very heavy, be sure to support it securely.




c.

Remove the 6 bolts and front suspension crossmember sub-assembly.

C282491

NOTICE:

When lowering the front suspension crossmember sub-assembly, be careful not to damage the vehicle body or other components installed on the vehicle.



Hide 45025D 20.REMOVE NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY

Hide 21.REMOVE STEERING LINK ASSEMBLY

Hide 48829A 22.REMOVE FRONT NO. 1 STABILIZER BRACKET LH

Hide 48824A 23.REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Use the same procedure described for the LH side.


Hide 48811 24.REMOVE FRONT STABILIZER BAR

Hide 48069 25.REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

a.
C282492

Remove the bolt and front lower No. 1 suspension arm sub-assembly LH from the front suspension crossmember sub-assembly.


Hide 48068 26.REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 12363A 27.REMOVE ENGINE MOVING CONTROL ROD (for Manual Transaxle)

a.
C231364

Remove the bolt and engine moving control rod from the front suspension crossmember sub-assembly.


Hide 12363A 28.REMOVE ENGINE MOVING CONTROL ROD (for CVT)

a.
C287953

Remove the bolt and engine moving control rod from the front suspension crossmember sub-assembly.