Home › Engine / Hybrid System › 1KR-FE (ENGINE MECHANICAL) › ENGINE UNIT › from 2020.07
RM36W0E _51 Engine / Hybrid System _091035 1KR-FE ENGINE MECHANICAL _0431331 ENGINE UNIT A

1KR-FE ENGINE MECHANICAL  ENGINE UNIT  INSTALLATION  


PROCEDURE

Hide 1.INSTALL WIRE HARNESS CLAMP BRACKET

a.

Install the wire harness clamp bracket with the bolt.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


Hide 89481B 4.INSTALL DIFFERENTIAL PRESSURE SENSOR (w/ Differential Pressure Sensor)

Hide 29603B 6.INSTALL OIL LEVEL GAUGE GUIDE OIL HOSE

a.

Install the oil level gauge guide oil hose to the engine oil level dipstick guide and cylinder head sub-assembly and slide the 2 clips to secure them.


Hide 23291 7.INSTALL INJECTOR VIBRATION INSULATOR

Hide 23814B 8.INSTALL FUEL DELIVERY PIPE

Hide 25680 9.INSTALL EGR COOLER ASSEMBLY

Hide 16281N 10.INSTALL NO. 4 WATER BY-PASS HOSE

a.

Install the No. 4 water by-pass hose to the cylinder head sub-assembly and slide the clip to secure it.


Hide 16261G 11.INSTALL WATER BY-PASS HOSE ASSEMBLY

a.

Install the water by-pass hose assembly to the cylinder head sub-assembly and slide the 2 clips to secure it.