Section 2 - Suspension
Section 2 - Suspension
Section 2B - Front Suspension
NOTE:
For fastener(s) with * (asterisk) below, refer to the specified procedure in “Repair Instructions”.
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Strut bracket nut | 140 | 14.3 | 103.5 |
 |
| Brake hose mounting bolt | 26 | 2.7 | 19.5 |
|
| Stabilizer joint nut | 50 | 5.1 | 37.0 |
|
| Strut support upper nut | 50 | 5.1 | 37.0 |
|
| Strut support lower nut | 55 | 5.6 | 40.5 |
|
| Suspension arm joint nut | 65 | 6.6 | 48.0 |
|
| Suspension arm front bushing bolt | 165 | 16.8 | 122.0 |
|
| Suspension arm rear bushing bolt | 95 | 9.7 | 70.0 |
|
| Stabilizer bar mounting bracket bolt* | 23 | 2.3 | 17.0 |
|
| Suspension frame mounting No.1 bolt | 95 | 9.7 | 70.0 |
|
| Suspension frame mounting No.2 bolt | 145 | 14.8 | 107.0 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to:
Section 2C - Rear Suspension
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Rear shock absorber upper nut | 30 | 3.1 | 22.5 |
|
| Rear shock absorber lower nut | 90 | 9.2 | 66.5 |
|
| Rear axle bolt | 100 | 10.2 | 74.0 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to:
Section 2D - Wheels and Tires
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Wheel bolt | 100 | 10.2 | 74.0 |
|
| Tire pressure sensor mounting nut | 7.5 | 0.76 | 5.5 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to: