Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2015.04
RM19V0EQ _51 Engine / Hybrid System _014581 CRUISE CONTROL _0163371 DYNAMIC RADAR CRUISE CONTROL SYSTEM T

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Symptom Suspected Area Link
The dynamic radar cruise control system cannot be turned on using the cruise control main switch (ON-OFF button) Cruise control main switch circuit Click here
Cruise main indicator circuit Click here
ECM Click here
Cannot change between vehicle-to-vehicle distance control mode and constant speed control mode Cruise control main switch circuit Click here
Combination meter assembly Click here
ECM Click here
Set distance cannot be changed Distance control switch circuit Click here
Combination meter assembly Click here
Driving support ECU assembly Click here
ECM Click here
Cannot select vehicle-to-vehicle distance control mode Combination meter assembly Click here
Millimeter wave radar sensor assembly Click here
Driving support ECU assembly Click here
ECM Click here
Vehicle speed setting cannot be performed (The cruise control indicator remains illuminated in the combination meter when dynamic radar cruise control system is turned on using the cruise control main switch (ON-OFF button), but turns off when the SET function is operated) Cruise control main switch circuit Click here
ECM Click here
Vehicle speed setting cannot be performed with constant speed control mode (The cruise control indicator remains illuminated in the combination meter when dynamic radar cruise control system is turned on using the cruise control main switch (ON-OFF button), and remains on when the SET function is operated) Stop light switch circuit Click here
Vehicle speed sensor circuit Click here
Cruise control main switch circuit Click here
Vehicle stability control system Click here
ECM Click here
Vehicle speed setting cannot be performed with vehicle-to-vehicle distance control mode (The cruise control indicator remains illuminated in the combination meter when dynamic radar cruise control system is turned on using the cruise control main switch (ON-OFF button), and remains on when the SET function is operated) Millimeter wave radar sensor assembly Click here
Stop light switch circuit Click here
Vehicle speed sensor circuit Click here
Cruise control main switch circuit Click here
Wiper signal circuit Click here
Vehicle stability control system Click here
ECM Click here
While vehicle is being driven with the dynamic radar cruise control system controlling vehicle speed, the control of vehicle speed is canceled Stop light switch circuit Click here
Vehicle stability control system Click here
Cruise control main switch circuit Click here
Combination meter assembly Click here
Vehicle speed sensor circuit Click here
Wiper signal circuit Click here
ECM Click here
Pulling back on the cruise control main switch does not cancel vehicle speed control by the dynamic radar cruise control system (The cruise control SET indicator remains illuminated) Cruise control main switch circuit Click here
Combination meter assembly Click here
ECM Click here
Pulling back on the cruise control main switch does not cancel vehicle speed control by the dynamic radar cruise control system (The cruise control SET indicator goes out) ECM Click here
Vehicle speed control by the dynamic radar cruise control system is not canceled when vehicle speed drops below the low speed limit (The cruise control SET indicator remains illuminated) Vehicle speed sensor circuit Click here
Combination meter assembly Click here
ECM Click here
Vehicle speed control by the dynamic radar cruise control system is not canceled when vehicle speed drops below the low speed limit (The vehicle-to-vehicle cruise control SET indicator goes out) ECM Click here
Depressing the brake pedal does not cancel vehicle speed control by the dynamic radar cruise control system (The cruise control SET indicator remains illuminated) Stop light switch circuit Click here
Combination meter assembly Click here
ECM Click here
Depressing the brake pedal does not cancel vehicle speed control by the dynamic radar cruise control system (The vehicle-to-vehicle cruise control SET indicator goes out) ECM Click here
Vehicle speed control by the dynamic radar cruise control system is not canceled when the wipers operate on HI (The cruise control SET indicator remains illuminated) Wiper signal circuit Click here
Combination meter assembly Click here
ECM Click here
Vehicle speed control by the dynamic radar cruise control system is not canceled when the wipers operate on HI (The cruise control SET indicator (vehicle-to-vehicle distance control mode) goes out) ECM Click here
Moving the shift lever or operating the shift paddle switch* does not cancel vehicle speed control by the dynamic radar cruise control system (The cruise control SET indicator remains illuminated) Transmission control switch circuit Click here
Shift paddle switch circuit* Click here
Combination meter assembly Click here
ECM Click here
Moving the shift lever does not cancel vehicle speed control by the dynamic radar cruise control system. (The cruise control SET indicator (vehicle-to-vehicle distance control mode) goes out.) ECM Click here
Hunting (Speed is not constant) Vehicle speed sensor circuit Click here
SFI system Click here
ECM Click here
Even though the front millimeter wave radar sensor is not dirty, the warning message "CLEAN RADAR SENSOR" is displayed Millimeter wave radar sensor assembly is dirty Click here
Adjust front millimeter wave radar sensor assembly Click here
Millimeter wave radar sensor assembly Click here
The beam axis of the millimeter wave radar sensor cannot be adjusted Check position, distance and angle of reflector -
Check installation of millimeter wave radar sensor assembly Click here
Millimeter wave radar sensor assembly Click here
Driving support ECU assembly Click here
ECM Click here
The warning buzzer does not sound Skid control buzzer circuit Click here
Vehicle stability control system Click here
Millimeter wave radar sensor assembly Click here
ECM Click here
No brake control (when decelerating) Vehicle stability control system Click here
ECM Click here
The cruise control SET indicator does not illuminate (Vehicle speed can be set) Cruise control SET indicator circuit Click here
Combination meter assembly Click here
ECM Click here

*: w/ Shift Paddle Switch