Display Function
Symptom
| Suspected Area
| See page
|
Pressing power switch does not turn on system.
| Proceed to "Navigation Receiver Assembly Power Source Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Black screen. (No image appears on navigation/audio screen.)
| Proceed to "Black Screen"
|
Click here
|
Proceed to "Check Software Error History" in Operation Check
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Display does not dim (does not change to night screen) with tail switch on.
| Proceed to "Display does not Dim when Light Control Switch is Turned ON"
|
Click here
|
Proceed to "Illumination Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Power does not turn off. (Screen remains on.)
| Proceed to "Navigation Receiver Assembly Power Source Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Display panel does not open, tilt, or tilts improperly.
| Proceed to "Display Panel does not Open, Tilt or Tilts Improperly"
|
Click here
|
Proceed to "Navigation Receiver Assembly Power Source Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Screen is distorted.
| Proceed to "Navigation Receiver Assembly Power Source Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Screen flicker or color distortion.
| Proceed to "Screen Flicker or Color Distortion"
|
Click here
|
Proceed to "Navigation Receiver Assembly Power Source Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Panel Switch and Touch Switch Function
Symptom
| Suspected Area
| See page
|
Illumination for panel switches does not come on with tail switch on.
| Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON"
|
Click here
|
Proceed to "Illumination Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Panel switches do not function.
| Proceed to "Panel Switches do not Function"
|
Click here
|
Proceed to "Navigation Receiver Assembly Power Source Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Touch panel switch does not function.
| Proceed to "Touch Panel Switch does not Function"
|
Click here
|
Proceed to "Navigation Receiver Assembly Power Source Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Navigation function switches can be operated while vehicle is driving.
| Proceed to "Parking Brake Switch Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Navigation Function
Symptom
| Suspected Area
| See page
|
GPS mark is not displayed.
| Proceed to "GPS Mark is not Displayed"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Date and time on navigation screen is different from actual date and time.
| Proceed to "GPS Mark is not Displayed"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Vehicle position mark deviates from correct position and does not return to correct position.
| Proceed to "GPS Mark is not Displayed"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Cursor or map rotates when vehicle is stopped.
| Proceed to "Cursor or Map Rotates when Vehicle Stopped"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Vehicle position mark moves in the opposite direction to the vehicle.
| Proceed to "Cursor or Map Rotates when Vehicle Stopped"
|
Click here
|
Proceed to "Reverse Signal Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Vehicle position mark deviates from and returns to correct position repeatedly even though GPS mark is displayed.
| Proceed to "GPS Mark is not Displayed"
|
Click here
|
Drive the vehicle for sensor learning. (At a place where GPS signals can be received, drive the vehicle clockwise and counterclockwise in at least a 200 meter square 2 times or more.)
| -
|
Navigation antenna assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Vehicle position mark moves slow or fast.
| Proceed to "GPS Mark is not Displayed"
|
Click here
|
Navigation antenna assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Voice guidance does not function.
| Proceed to "Voice Guidance does not Function"
|
Click here
|
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Proceed to "Navigation Voice Circuit"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Map display is incomplete.
| Hard disk drive
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Route cannot be calculated.
| Proceed to "Route cannot be Calculated"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Navigation system cannot record memory point registration or each item setting.
| Hard disk drive
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
A message indicating to wait for a while because of low temperature is displayed.
| Start the engine and increase cabin temperature (near navigation ECU sub-assembly).
| -
|
Hard disk drive
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
A message is displayed because map data cannot be read, and current position screen is not displayed.
| If message appears only when driving on rough roads, check if message disappears when vehicle is stopped.
| -
|
Hard disk drive
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Map screen turns white or blue. (GPS receiving status is displayed normally, and switches and own vehicle position mark are also displayed normally.)
| Change map scale to smallest (a scale that shows a large area).
| -
|
Hard disk drive
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Customizable parameters cannot be changed. (Customizable parameters can be changed by using the intelligent tester.)
| Navigation ECU sub-assembly
|
Click here
|
Reverse signal does not change in vehicle signal check mode.
| Proceed to "Reverse Signal Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Parking brake switch signal does not change in vehicle signal check mode.
| Proceed to "Parking Brake Switch Circuit"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
General Audio Function
Symptom
| Suspected Area
| See page
|
No sound can be heard from speakers.
| Proceed to "No Sound can be Heard from Speakers"
|
Click here
|
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Abnormal noise occurs.
| Proceed to "Noise Occurs"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Sound quality is bad in all modes. (Volume is too low.)
| Check that the ASL function is off.
| -
|
Proceed to "Poor Sound Quality in All Modes (Low Volume)"
|
Click here
|
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
|
Click here
|
Proceed to "Speaker Circuit"
|
Click here
|
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
ASL does not function.
| Check that the ASL function is on.
| -
|
Proceed to "Vehicle Speed Signal Circuit between Stereo Component Amplifier and Combination Meter"
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
"Bluetooth" Hands-free Function
Symptom
| Suspected Area
| See page
|
"Bluetooth" is inoperative.
| Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Cellular phone registration failure.
| Proceed to "Cellular Phone Registration Failure, Phonebook Transfer Failure"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Cellular phone cannot make outgoing/incoming calls or call in a certain place.
| Proceed to "Cellular Phone cannot Make Outgoing/Incoming Calls"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Message that prompts to check the cellular phone is displayed.
| Proceed to "Cellular Phone cannot Make Outgoing/Incoming Calls"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Phonebook data cannot be transferred manually or automatically.
| Check the automatically download contact setting.
| -
|
When transferring phonebook data, OBEX authentication may be required. Enter "1234" into the "Bluetooth" phone.
| -
|
Proceed to "Cellular Phone Registration Failure, Phonebook Transfer Failure"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Volume of other caller's voice is not at an appropriate volume level, there is noise, sound quality is poor or other caller's voice cannot be heard.
| Proceed to "Check Hands-free Voice Quality and Volume Setting" in Operation Check
|
Click here
|
Proceed to "The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Stereo component amplifier assembly
|
Click here
|
Other caller cannot hear your voice at an appropriate volume level, there is noise or an echo, sound quality is poor or other caller cannot hear your voice.
| Proceed to "Check Hands-free Voice Quality and Volume Setting" in Operation Check
|
Click here
|
Proceed to "The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted"
|
Click here
|
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
E-mail/SMS cannot be received or sent.
| Check whether messages can be received/sent using the cellular phone.
| -
|
Check that the phone is registered as a hands-free device.
| -
|
Check the sending and receiving e-mails/SMS via the navigation system setting.
| -
|
Proceed to "Cellular Phone Registration Failure, Phonebook Transfer Failure"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
"Bluetooth" Audio Function
Symptom
| Suspected Area
| See page
|
Portable player cannot be registered.
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Portable player cannot be connected manually/automatically.
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/Automatically"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Cellular phone with portable audio function cannot be recognized as "Bluetooth" audio device even when connected using "Bluetooth".
| Proceed to "Portable Player cannot be Registered"
|
Click here
|
Proceed to "Portable Player cannot be Connected Manually/Automatically"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Sound of portable player cannot be heard from speakers, or sound is low.
| Proceed to "Sound of Portable Player cannot be Heard from Speakers or Sound is Low"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Portable player does not play even after "Bluetooth" audio mode is selected.
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Portable player does not play.
| Proceed to "Does not Play even after Bluetooth Audio Mode is Selected"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Track information such as track number, track name, elapsed play time and playlist is not displayed.
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Operation switches for portable player such as play, pause, repeat, random and scan are not displayed.
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Battery condition of portable player is not displayed.
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
"Bluetooth" signal condition is not displayed.
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Portable player cannot pause, select file, fast forward, fast rewind, play at random or scan.
| Proceed to "Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Noise occurs or sound skips when portable player plays.
| Proceed to "Noise Occurs or Sound Skips when Portable Player Plays"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Registered device cannot be deleted.
| Proceed to "Registered Device cannot be Deleted"
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
USB Audio System Function
Symptom
| Suspected Area
| See page
|
USB audio system sound cannot be heard or sound quality is bad. (USB connector is used.)
| Proceed to "Data Signal Circuit between Navigation Receiver and Stereo Jack Adapter"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
USB device or "iPod" is not recognized.
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Track information such as track, artist and album names are not displayed.
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
USB device or "iPod" is recognized but cannot play nor play in a sorted order.
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Album cover art cannot be displayed.
| Check that Display Cover Art on the "iPod" Settings screen is set to on.
| -
|
Check that a JPEG file is used for the cover art.
| -
|
"iPod" battery cannot be charged.
| Proceed to "USB Audio System Recognition/Play Error"
|
Click here
|
No. 1 stereo jack adapter assembly
|
Click here
|
Navigation ECU sub-assembly
|
Click here
|
Connected Service
Symptom
| Suspected Area
| See page
|
Connection to the provider fails.
| Contact the provider and check if the items in Detail Setting are set correctly.
| -
|
Check if the cellular phone is in standby mode.
| -
|
Check if the cellular phone is compatible with the connected service.
| -
|
Navigation ECU sub-assembly
|
Click here
|
POIs are not displayed on the list.
| Check if POIs are stored in USB device root folders.
| -
|
Check that POIs with extension .csi are stored in the USB device.
| -
|
Check that 8.3 filename is used for POIs.
| -
|
Check that the file size of POIs is not 400 kb or more.
| -
|
Check that nothing has been changed for downloaded POIs other than renaming them.
| -
|
Navigation ECU sub-assembly
|
Click here
|
POIs cannot be registered to the navigation system.
| Check if the maximum number of memory points has been registered.
| -
|
Check that nothing has been changed for downloaded POIs other than renaming them.
| -
|
Navigation ECU sub-assembly
|
Click here
|
Fuel Consumption Function
Symptom
| Suspected Area
| See page
|
"Fuel Consumption" icon is dimmed.
| Check if other icons or items displayed on screen have any problems.
| -
|
Navigation ECU sub-assembly
|
Click here
|
Graph is not displayed on "Trip Information" screen.
| Recheck with the engine running.
| -
|
Navigation ECU sub-assembly
|
Click here
|
Cruise range is not displayed on "Trip Information" screen.
| Turn ignition switch to ON and recheck.
| -
|
Navigation ECU sub-assembly
|
Click here
|
Graph is not updated on "Past record" screen even though "Clear" is selected.
| Turn ignition switch to ON and recheck.
| -
|
Navigation ECU sub-assembly
|
Click here
|
Graph is not displayed on "Past record" screen.
| Turn ignition switch to ON and recheck.
| -
|
Navigation ECU sub-assembly
|
Click here
|