56111
1.REMOVE WINDSHIELD GLASS
75911B
2.REMOVE BLACK OUT HOOD TAPE
When removing the black out hood tape, heat the vehicle body and black out hood tape using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Black Out Hood Tape | 20 to 30 °C (68 to 86 °F) |
Do not heat the vehicle body or black out hood tape excessively.
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the black out hood tape and pull it parallel to the vehicle body to remove it.
62720C
3.REMOVE SIDE FRONT WINDOW GLASS SUB-ASSEMBLY LH
62109A
4.REMOVE SIDE LOWER WINDOW GLASS SUB-ASSEMBLY LH
75655
5.REMOVE CENTER PILLAR TAPE
When removing the center pillar tape, heat the vehicle body and center pillar tape using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Center Pillar Tape | 20 to 30 °C (68 to 86 °F) |
Do not heat the vehicle body or center pillar tape excessively.
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the center pillar tape and pull it parallel to the vehicle body to remove it.
81570
6.REMOVE CENTER STOP LIGHT ASSEMBLY
75552H
7.REMOVE ROOF DRIP SIDE MOULDING LH
75551H
8.REMOVE ROOF DRIP SIDE MOULDING RH
Use the same procedure described for the LH side.
64810
9.REMOVE BACK WINDOW ASSEMBLY
75937
10.REMOVE REAR ROOF STRIPE
When removing the rear roof stripe, heat the vehicle body and rear roof stripe using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Rear Roof Stripe | 20 to 30 °C (68 to 86 °F) |
Do not heat the vehicle body or rear roof stripe excessively.
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the rear roof stripe and pull it parallel to the vehicle body to remove it.
53182A
11.REMOVE HEADLIGHT COVER LH
53181A
12.REMOVE HEADLIGHT COVER RH
Use the same procedure for the RH side and LH side.
61196D
13.REMOVE FRONT PILLAR END COVER LH
61195E
14.REMOVE FRONT PILLAR END COVER RH
75914B
15.REMOVE BLACK OUT FENDER TAPE LH
When removing the black out fender tape LH, heat the vehicle body and black out fender tape LH using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Black Out Fender Tape LH | 20 to 30 °C (68 to 86 °F) |
Do not heat the vehicle body or black out fender tape LH excessively.
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the black out fender tape LH and pull it parallel to the vehicle body to remove it.
75913B
16.REMOVE BLACK OUT FENDER TAPE RH
Use the same procedure described for the LH side.