| Main switch cannot be turned ON. (CRUISE main indicator light on combination meter does not illuminate.)
|
1. Cruise control switch circuit
|
( )
|
| 2. Cruise main indicator circuit
|
( )
|
| 3. ECM (2AZ-FE)
|
( )
|
| 3. ECM (2GR-FE)
|
( )
|
| 4. CAN communication line
|
( )
|
| SET is not occurring or CANCEL is occurring. (DTC is not output.)
|
1. Cruise control switch circuit
|
( )
|
| 2. Combination meter
|
( )
|
| 3. ECM (2AZ-FE)
|
( )
|
| 3. ECM (2GR-FE)
|
( )
|
| Actual vehicle speed deviates above or below the set speed.
|
1. Vehicle speed sensor circuit
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| Gear shifting occurs frequently between 3rd and O/D when driving with cruise control on.
|
1. Vehicle speed sensor circuit
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| Cruise control does not cancel, even when brake pedal is depressed.
|
1. Stop light switch circuit
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| Cruise control does not cancel, even when transmission is shifted to N.
|
1. Park / neutral position switch circuit (U241E)
|
( )
|
| 1. Park / neutral position switch circuit (U660E)
|
( )
|
| 1. Park / neutral position switch circuit (K112)
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| Control switch does not operate. (-/SET, +/RES, CANCEL not position.)
|
1. Cruise control switch circuit
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| Speed setting cannot be canceled. (CANCEL function fails.)
|
1. Cruise control switch circuit
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| SET possible at 40 km/h (25 mph) or less, or CANCEL does not operate.
|
1. Vehicle speed sensor circuit
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| Poor response is ACCEL and RESUME modes.
|
1. Cruise control switch circuit
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| O/D does not resume, even though road is not uphill.
|
1. Vehicle speed sensor circuit
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| DTC memory is erased.
|
1. ECM (2AZ-FE)
|
( )
|
| 1. ECM (2GR-FE)
|
( )
|
| DTC is not output, or is output when it should not be.
|
1. TC and CG terminal circuit
|
( )
|
| 2. ECM (2AZ-FE)
|
( )
|
| 2. ECM (2GR-FE)
|
( )
|
| Cruise main indicator light remains ON or fails to light.
|
1. Cruise control switch circuit
|
( )
|
| 2. Cruise main indicator circuit
|
( )
|
| 3. Combination meter
|
( )
|
| 4. ECM (2AZ-FE)
|
( )
|
| 4. ECM (2GR-FE)
|
( )
|