Home › Vehicle Interior › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM › 2014.09–2016.05
RM24M0E _58 Vehicle Interior _059586 ENGINE IMMOBILISER _0292196 ENGINE IMMOBILISER SYSTEM T

ENGINE IMMOBILISER  ENGINE IMMOBILISER SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:

Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


Engine immobiliser system
Symptom Suspected Area See page
Engine does not start 1. ID code box power source circuit (Click here)
2. Certification ECU power source circuit (Click here)
3. Steering lock ECU power source circuit (Click here)
4. Smart entry and start system (for door lock)*1 (Click here)
5. Push-button Start (for 2AZ-FE)*2 (Click here)
6. Smart entry and start system (for starting) (for 2AZ-FE)*1 (Click here)
7. Push-button Start (for 2GR-FE)*2 (Click here)
8. Smart entry and start system (for starting) (for 2GR-FE)*1 (Click here)
9. SFI system (for 2AZ-FE) (Click here)
10. SFI system (for 2GR-FE) (Click here)

·

*1: w/ Smart Entry and Start System

·

*2: w/ Push-button Start