Home › Engine / Hybrid System › 2AZ-FE STARTING › SMART ENTRY AND START SYSTEM › 2013.04–2016.05
RM24M0E _51 Engine / Hybrid System _059575 2AZ-FE STARTING _0292080 SMART ENTRY AND START SYSTEM T

2AZ-FE STARTING  SMART ENTRY AND START SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:

Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


Smart entry and start system
Symptom Suspected Area See page
Power source mode does not change 1. Engine switch indicator circuit (Click here)
2. Room oscillator does not recognize key (Click here)
3. Engine switch (Click here)
4. ID code box (Click here)
5. Main body ECU (Click here)
6. Wire harness (Click here)
Engine does not start 1. Push-button start function DTCs (Click here)
2. Power source mode does not change (Click here)
3. Engine immobiliser system (Click here)
4. Steering lock system (Click here)
5. SFI system (Click here)
6. Engine switch (Click here)
7. Park / Neutral position switch (for U241E) (Click here)
8. Park / Neutral position switch (for K112) (Click here)
9. Stop light switch (Click here)
10. Main body ECU (Click here)
11. Wire harness (Click here)