The TRAC OFF indicator will come on in any of the following conditions: The transfer indicator switch (L4 position) is turned on, the rear differential switch is turned on, the VSC OFF switch is turned on (w/o auto LSD), or the VSC OFF switch is held down for 3 seconds (w/ auto LSD).
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
Before troubleshooting, check that the rear differential switch circuit, the transfer indicator switch (L4 position) circuit, and the VSC OFF switch circuit are all off.
When replacing the master cylinder solenoid, perform zero point calibration (Click here).
1. CHECK SKID CONTROL ECU CONNECTOR
Check that the ECU connector is securely connected.