Home › COMMUNICATION SYSTEM › CAN COMMUNICATION › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here



RESULT LIST OF HOW TO PROCEED WITH TROUBLESHOOTING AND CAN BUS LINE 
Symptom
Suspected area
See page
Air conditioning control functions (cooling, heating and dehumidification) do not operate normally.
CAN communication
Click here
The result of following the inspection procedures for "CAN Bus Line" is "Open in CAN Main Bus Line".
Open in CAN Main Bus Line
Click here
The result of following the inspection procedures for "CAN Bus Line" is "Short in CAN Bus Lines".
Short in CAN Bus Lines
Click here
The result of following the inspection procedures for "CAN Bus Line" is "Short to B+ in CAN Bus Line".
Short to B+ in CAN Bus Line
Click here
The result of following the inspection procedures for "CAN Bus Line" is "Short to GND in CAN Bus Line".
Short to GND in CAN Bus Line
Click here
The result of following the inspection procedures for "HOW TO PROCEED WITH TROUBLESHOOTING" is "Air Conditioning Amplifier Communication Stop Mode".
Air Conditioning Amplifier Communication Stop Mode
Click here
The result of following the inspection procedures for "HOW TO PROCEED WITH TROUBLESHOOTING" is "Open in One Side of CAN Sub Bus Line".
Open in One Side of CAN Sub Bus Line
Click here