REMOVAL
Removal / installation · Vehicles built from Dec 2017
Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
| 1.
DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM |
 |
(Click here)
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3.
REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY |
 |
(Click here)
| 4.
REMOVE NO.1 ENGINE UNDER COVER (w/ Under Cover and Intercooler) |
|
| 5.
DRAIN ENGINE COOLANT |
 |
for 1KD-FTV:(Click here)
for 2KD-FTV:(Click here)
for 1TR-FE:(Click here)
for 2TR-FE:(Click here)
for 5L-E:(Click here)
for 1GD-FTV:(Click here)
| 6.
REMOVE INTERCOOLER ASSEMBLY (w/ Intercooler) |
 |
for 1KD-FTV:(Click here)
for 2KD-FTV:(Click here)
for 1GD-FTV:(Click here)
| 7.
DISCONNECT COOLER REFRIGERANT SUCTION PIPE A |
 |
- Remove the bolt, and slide the hook connector.
Text in Illustration
*1
|
Cooler Refrigerant Suction Pipe A
|
*2
|
Hook Connector
|
*3
|
Cooler Refrigerant Liquid Pipe B
|
Disconnect the cooler refrigerant suction pipe A.
Remove the O-ring from the cooler refrigerant suction pipe A.
- NOTICE:
- Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
| 8.
DISCONNECT COOLER REFRIGERANT LIQUID PIPE B |
 |
Disconnect the cooler refrigerant liquid pipe B.
Remove the O-ring from the cooler refrigerant liquid pipe B.
- NOTICE:
- Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
| 9.
DISCONNECT HEATER WATER HOSE OUTLET |
 |
- Using pliers, grip the claws of the clip and slide the clip to disconnect the heater outlet water hose.
Text in Illustration
*1
|
Heater Outlet Water Hose
|
*2
|
Heater Water Inlet Hose A
|
| 10.
DISCONNECT HEATER WATER HOSE INLET A |
 |
- HINT:
- Disconnection of the heater water outlet hose A is the same as for the heater water inlet hose A.
| 11.
REMOVE INSTRUMENT PANEL ASSEMBLY |
 |
(Click here)
| 12.
REMOVE STEERING COLUMN ASSEMBLY |
 |
(Click here)
| 13.
REMOVE AIR DUCT NO.1 |
 |
- Remove the clip.
Release the 2 claws and remove the air duct No.1.
| 14.
DISCONNECT PARKING BRAKE CONTROL HANDLE SUB-ASSEMBLY |
 |
- Remove the 2 bolts and disconnect the parking brake control handle sub-assembly.
| 15.
REMOVE INSTRUMENT PANEL TO FLOOR BRACE SUB-ASSEMBLY |
 |
- Remove the 5 bolts and the instrument panel to floor brace sub-assembly.
| 16.
REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY |
 |
Remove the clamps and connectors, and then disconnect the wire harness.


Text in Illustration
*A
|
w/ PTC
|
*B
|
for Wide Body
|
Remove the bolts, nuts and junction blocks.
Remove the 2 caps and 2 bolts.


Text in Illustration
*A
|
for Manual Transmission
|
-
|
-
|
*1
|
''Torx'' Bolt
|
*2
|
Collar
|
Remove the 2 bolts and nut. (AUTOMATIC TRANSMISSION)
Remove the 3bolts and nut. (MANUAL TRANSMISSION)
Using a "Torx" socket wrench (T40), remove the 4 "Torx" bolts.
- HINT:
- The "Torx" bolts on the passenger side can be removed with the collar for adjustment.
Using a hexagon wrench 12 mm, remove the 2 collars and instrument panel reinforcement assembly.
| 17.
REMOVE AIR CONDITIONER UNIT ASSEMBLY |
 |
Remove the 3 bolts and air conditioner unit assembly.


| 18.
REMOVE AIR DUCT NO.2 |
 |
- Release the 2 claws and remove the air duct No.2.
| 19.
REMOVE AIR CONDITIONING RADIATOR ASSEMBLY |
 |
- for LHD, w/ PTC:
Remove the screw and then disconnect the wire harness.
for RHD, w/ PTC:
- Detach the clamp.
- Remove the 3 screws and air conditioning radiator assembly.