2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. DRAIN ENGINE COOLANT (w/ Intercooler)
  1. w/ EGR Cooler:
    (Click here)
  2. w/o EGR Cooler:
    (Click here)

4. REMOVE DIESEL THROTTLE BODY ASSEMBLY
  1. w/ EGR Cooler:
    (Click here)
  2. w/o EGR Cooler:
    (Click here)

5. REMOVE MANIFOLD STAY WITH VACUUM SWITCHING VALVE (w/ Intercooler)

  1. A211857
    Disconnect the vacuum switching valve connector.

  1. A211858
    Disconnect the 3 vacuum transmitting hoses.

  1. A211859
    Remove the 2 bolts and manifold stay with vacuum switching valve.


6. REMOVE MANIFOLD STAY (w/o Intercooler)

  1. A099622E01
    Remove the 2 bolts and manifold stay.


7. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

  1. A272134E01
    Remove the bolt and injection pipe clamp.
    Text in Illustration 
    *A
    w/ Intercooler
    *B
    w/o Intercooler

  1. Remove the bolt and engine oil level dipstick guide.

  1. Remove the O-ring from the engine oil level dipstick guide.


8. REMOVE EGR COOLER
(Click here)

9. REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY WITH NO. 1 EGR PIPE SUB-ASSEMBLY (w/ Intercooler)
(Click here)

10. REMOVE VACUUM SWITCHING VALVE BRACKET (w/o Intercooler)

  1. w/ EGR System without EGR Cooler:

    1. A114169
      Remove the 2 connectors from the E-VRV and EGR valve.

    2. Disconnect the vacuum hoses from the 2 locations.

    3. Remove the 2 bolts and vacuum switching valve bracket.

  1. w/o EGR System:

    1. A233088
      Remove the 2 bolts and vacuum switching valve bracket.


11. REMOVE NO. 2 INTAKE AIR CONNECTOR BRACKET (w/o Intercooler)

  1. A273018E01
    Remove the 3 bolts and No. 2 intake air connector bracket.
    Text in Illustration 
    *A
    w/ Intercooler
    *B
    w/o Intercooler
    *1
    No. 2 Intake Air Connector Bracket
    *2
    Intake Air Connector


12. REMOVE INTAKE AIR CONNECTOR (w/o Intercooler)
  1. Remove the 2 nuts, bolt, intake air connector and gasket.


13. REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY (w/o Intercooler)

  1. A211849
    w/ Intercooler:
    Remove the 2 bolts, No. 1 EGR pipe and gasket from the EGR valve adapter.

  1. A272003E01
    w/o Intercooler:
    Remove the 2 bolts, 2 nuts, No. 1 EGR pipe and 2 gaskets.
    Text in Illustration 
    *1
    Gasket


14. REMOVE ELECTRIC EGR CONTROL VALVE ASSEMBLY (w/o Intercooler)

  1. A211850
    w/ Intercooler:
    Remove the 2 bolts, electric EGR control valve and gasket from the EGR valve adapter.

  1. w/o Intercooler:

    1. Disconnect the EGR valve position sensor connector.

    2. Remove the electric EGR control valve and gasket.


15. REMOVE NO. 1, NO. 2 AND NO. 3 INJECTION PIPE SUB-ASSEMBLY
  1. w/ Intercooler:
    (Click here)
  2. w/o Intercooler:
    (Click here)

16. REMOVE NO. 4 INJECTION PIPE SUB-ASSEMBLY
  1. w/ Intercooler:
    (Click here)
  2. w/o Intercooler:
    (Click here)

17. REMOVE NO. 2 NOZZLE LEAKAGE PIPE ASSEMBLY
  1. w/ Intercooler:
    (Click here)
  2. w/o Intercooler:
    (Click here)

18. REMOVE NO. 3 INTERCOOLER SUPPORT BRACKET (w/ Intercooler)

  1. A149935
    Remove the bolt and support bracket.


19. REMOVE INTAKE MANIFOLD INSULATOR (w/ Intercooler)

  1. A148158
    Remove the 2 bolts and insulator from the manifold.


20. REMOVE NO. 2 MANIFOLD STAY (w/ Intercooler)
  1. Remove the bolt and No. 2 manifold stay.


21. REMOVE INTAKE MANIFOLD

  1. A272135E01
    w/ Intercooler:
    Disconnect the vacuum hose and vacuum switching valve connector.
    Text in Illustration 
    *A
    w/ Intercooler
    *B
    w/o Intercooler

  1. Remove the 2 nuts, 4 bolts, intake manifold and gasket.

← REMOVAL (Aug 2012 – Jul 2013)INSPECTION (Jun 2011 – Jul 2012) →