·
"Pre-Crash Safety Unavailable" is displayed*1
·
"PRE-CRASH SAFETY UNAVAILABLE" is displayed*2
|
Perform millimeter wave radar sensor assembly adjustment
|
|
| Millimeter wave radar sensor assembly temperature malfunction
|
|
| Millimeter wave radar sensor assembly low voltage malfunction
|
|
| Millimeter wave radar sensor assembly
|
|
| Combination meter assembly
|
|
·
"Pre-Crash Safety Unavailable Clean Sensor" is displayed*1
·
"PRE-CRASH SAFETY UNAVAILABLE CLEAN SENSOR" is displayed*2
|
Foreign matter attached to millimeter wave radar sensor assembly
|
-
|
| Millimeter wave radar sensor assembly
|
|
| Combination meter assembly
|
|
·
"Forward Camera System Unavailable" is displayed*1
·
"FORWARD CAMERA SYSTEM UNAVAILABLE" is displayed*2
|
Forward recognition camera
|
|
| Combination meter assembly
|
|
| Millimeter wave radar sensor assembly
|
|
·
"Forward Camera System Unavailable Clean Windshield" is displayed*1
·
"FORWARD CAMERA SYSTEM UNAVAILABLE CLEAN WINDSHIELD" is displayed*2
|
Foreign matter attached to forward recognition camera or area of windshield in front of forward recognition camera
|
-
|
| Forward recognition camera
|
|
| Combination meter assembly
|
|
| Millimeter wave radar sensor assembly
|
|
·
Although there is possibility of collision, pre-crash safety controls (all controls) do not operate ("Pre-crash Safety System Unavailable" is not displayed)*1
·
Although there is possibility of collision, pre-crash safety controls (all controls) do not operate ("PRE-CRASH SAFETY UNAVAILABLE" is not displayed)*2
|
Check if pre-crash safety system is canceled
|
-
|
| Vehicle condition/environment does not match the pre-crash safety system operation conditions (Confirm control operation conditions).
|
|
| Check installation condition of millimeter wave radar sensor assembly
|
|
| Perform millimeter wave radar sensor assembly adjustment
|
|
| Millimeter wave radar sensor assembly
|
|
| Check installation condition of forward recognition camera
|
|
| Perform forward recognition camera adjustment
|
|
| Forward recognition camera
|
|
| Although there is no possibility of collision, pre-crash safety controls (all controls) operate
|
Vehicle condition/environment does not match the pre-crash safety system operation conditions (Confirm control operation conditions).
|
|
| Check installation condition of millimeter wave radar sensor assembly
|
|
| Perform millimeter wave radar sensor assembly adjustment
|
|
| Millimeter wave radar sensor assembly
|
|
| Check installation condition of forward recognition camera
|
|
| Perform forward recognition camera adjustment
|
|
| Forward recognition camera
|
|
| Pre-crash safety system does not operate
|
Check if pre-crash safety system is canceled
|
-
|
| ECU power source circuit
|
|
| Millimeter wave radar sensor assembly
|
|
| Pre-crash safety system cannot be canceled (PCS warning light does not illuminate)
|
Combination meter assembly (check if indicator illuminates using Active Test)
|
|
| Millimeter wave radar sensor assembly
|
|
| Check pre-crash safety system cancel switch condition
|
|
| Pre-crash safety system cancel switch assembly circuit
|
|
| Combination meter assembly
|
|
| Pre-crash safety system warning timing cannot be changed (warning timing setting screen not displayed on multi-information display)
|
Millimeter wave radar sensor assembly
|
|
| Check pre-crash safety system cancel switch condition
|
|
| Pre-crash safety system cancel switch assembly circuit
|
|
| Combination meter assembly
|
|