| Pressing power switch does not turn on system
|
Proceed to "Pressing Power Switch does not Turn on System"
|
|
| Proceed to "Radio Receiver Power Source Circuit"
|
|
| Replace radio receiver assembly
|
|
| No sound can be heard from speakers (audio is mute)
|
Proceed to "Radio Receiver Power Source Circuit"
|
|
| Proceed to "No Sound can be Heard from Speakers"
|
|
| Proceed to "Speaker Circuit"
|
|
| Replace radio receiver assembly
|
|
| Sound quality is bad in all modes (volume is too low)
|
Proceed to "Poor Sound Quality in All Modes (Low Volume)"
|
|
| Proceed to "Speaker Circuit"
|
|
| Replace radio receiver assembly
|
|
| ASL does not function
|
Proceed to "Speed Signal Circuit"
|
|
| External device sound cannot be heard or sound quality is bad (stereo jack is used)
|
Proceed to "Radio Receiver Power Source Circuit"
|
|
| Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter"
|
|
| Replace No. 1 stereo jack adapter assembly
|
|
| Replace radio receiver assembly
|
|
| Abnormal noise occurs
|
Proceed to "Noise Occurs"
|
|
| Replace radio receiver assembly
|
|
| Radio broadcast cannot be received or poor reception
|
Proceed to "Radio Broadcast cannot be Received (Bad Reception)"
|
|
| CD cannot be inserted/played or CD is ejected right after insertion
|
Proceed to "Radio Receiver Power Source Circuit"
|
|
| Proceed to "CD cannot be Inserted/ Played or CD is Ejected Right After Insertion"
|
|
| CD cannot be ejected
|
Proceed to "Radio Receiver Power Source Circuit"
|
|
| Proceed to "CD cannot be Ejected"
|
|
| Sound quality is bad only when CD is played (volume is too low)
|
Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)"
|
|
| CD sound skips
|
Proceed to "CD Sound Skips"
|
|
| Turning on light control switch does not activate nighttime illumination of radio receiver
|
Proceed to "Illumination for Panel Switch does not Come on with Tail Switch ON"
|
|
| Proceed to "Illumination Circuit"
|
|
| Replace radio receiver assembly
|
|