2013-2015 Land Cruiser Prado · Service Manual Audio / Visual / Telematics

PROBLEM SYMPTOMS TABLE

Troubleshooting · Vehicles built from Aug 2014

Versions by build date: Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Display 
Symptom
Suspected Area
See page
Television display does not turn on.
Proceed to "Television Display Power Source Circuit"
Click here
Proceed to "Television Display does not Turn ON"
Click here
Black screen (when a disc or SD card is inserted, or when the system is in VTR mode).
Proceed to "Television Display Power Source Circuit"
Click here
Television display assembly
Click here
Color on display screen is not usual.
Adjust the settings for contrast, tint, color and brightness
-
Proceed to "Operation Check (Color Bar Check)"
Click here
Television display assembly
Click here
Only the BD/DVD screen is not displayed or not stable.
Check and clean disc
Click here
Television display assembly
Click here
Only display screen input from an external device is not displayed or not stable.
Check if the external device is normal
-
Proceed to "Display Signal Circuit between Video Terminal and Television Display"
Click here
Video (video adapter) terminal
-
Television display assembly
Click here
Only the SD card screen is not displayed or not stable.
Check SD card (usable SD card, recording files and format)
-
Television display assembly
Click here
Sound 
Symptom
Suspected Area
See page
Only sound quality input from an external device is poor or no sound can be heard.
Check if the external device is normal
-
Proceed to "Television Display Power Source Circuit"
Click here
Proceed to "Sound Signal Circuit between Video Terminal and Television Display"
Click here
Video (video adapter) terminal
-
Television display assembly
Click here
Quality of sound from wireless headphones is poor or no sound can be heard.
Proceed to "Television Display Power Source Circuit"
Click here
Proceed to "Sound from Wireless Headphones is Difficult to Hear, cannot be Heard, or Quality is Poor"
Click here
Television display assembly
Click here
Quality of sound from wired headphones is poor or no sound can be heard. (from both sides)
Proceed to "Television Display Power Source Circuit"
Click here
Proceed to "Sound from Wired Headphones is Difficult to Hear, cannot be Heard, or Quality is Poor"
Click here
Proceed to "Sound Signal Circuit between Headphone Terminal and Television Display"
Click here
Television display assembly
Click here
Quality of sound from wired headphones is poor or no sound can be heard. (from one side)
Proceed to "Sound from Wired Headphones is Difficult to Hear, cannot be Heard, or Quality is Poor"
Click here
Proceed to "Sound Signal Circuit between Headphone Terminal and Television Display"
Click here
Television display assembly
Click here
Quality of sound from speakers is poor or no sound can be heard. (w/ Navigation System)
Proceed to "Television Display Power Source Circuit"
Click here
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Television Display Assembly"
Click here
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Television Display Assembly"
Click here
Proceed to "Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier" (for Navigation Receiver Type)
Click here
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier" (for Radio and Display Type)
Click here
Proceed to "Mute Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier" (for Navigation Receiver Type)
Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier" (for Radio and Display Type)
Click here
Television display assembly
Click here
Proceed to "Speaker Circuit" (for Navigation Receiver Type)
Click here
Proceed to "Speaker Circuit" (for Radio and Display Type)
Click here
Stereo Component Amplifier Assembly
Click here
Navigation receiver assembly
Click here
Quality of sound from speakers is poor or no sound can be heard. (w/o Navigation System)
Proceed to "Television Display Power Source Circuit"
Click here
Proceed to "Sound Signal Circuit between Radio Receiver Assembly and Television Display Assembly"
Click here
Proceed to "Mute Signal Circuit between Radio Receiver Assembly and Television Display Assembly"
Click here
Proceed to "Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Proceed to "Mute Signal Circuit between Radio Receiver and Stereo Component Amplifier"
Click here
Television display assembly
Click here
Proceed to "Speaker Circuit"
Click here
Radio and display receiver assembly
Click here
Remote Control 
Symptom
Suspected Area
See page
A remote control system does not operate.
Proceed to "Television Display Power Source Circuit"
Click here
Proceed to "A Remote Control System does not Operate"
Click here
Television display assembly
Click here
Illumination 
Symptom
Suspected Area
See page
Television display assembly does not illuminate when the light control switch turns on.
Lighting System
Click here
Harness or connector
-
Television display assembly
Click here
← PROBLEM SYMPTOMS TABLE (Aug 2013 – Jul 2014)TERMINALS OF ECU (from Aug 2013) →