Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › 2015.06–2017.08
RM27T0E _51 Engine / Hybrid System _053696 CRUISE CONTROL _0260747 CRUISE CONTROL SYSTEM T

CRUISE CONTROL  CRUISE CONTROL SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Cruise Control System
Symptom Suspected Area See page
Cruise control main switch cannot be turned on (Cruise control indicator light in combination meter assembly does not illuminate) Cruise control switch circuit (Click here)
Cruise main indicator light circuit (Click here)
CAN communication system (for LHD with Entry and Start System) (Click here)
CAN communication system (for LHD without Entry and Start System) (Click here)
CAN communication system (for RHD with Entry and Start System) (Click here)
CAN communication system (for RHD without Entry and Start System) (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
SET not occurring or CANCEL occurring (DTC is not output) Cruise control switch circuit (Click here)
Combination meter assembly (Click here)
Stop light circuit (Click here)
Clutch switch circuit (for Manual Transmission) (Click here)
Park/neutral position switch assembly for Automatic Transmission) (Click here)
Front speed sensor LH (Click here)
Front speed sensor RH (Click here)
Rear speed sensor LH (Click here)
Rear speed sensor RH (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
Actual vehicle speed deviates above or below set speed Hydraulic brake booster assembly (for LHD) [for 1GR-FE, 1KD-FTV, 1GD-FTV] (Click here)
Hydraulic brake booster assembly (for RHD) [for 1GR-FE, 1KD-FTV, 1GD-FTV] (Click here)
Brake actuator assembly (for 2TR-FE) (Click here)
Front speed sensor LH (Click here)
Front speed sensor RH (Click here)
Rear speed sensor LH (Click here)
Rear speed sensor RH (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
Combination meter assembly (Click here)
Cruise control not canceled when brake pedal is depressed Stop light switch circuit (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
Cruise control not canceled when shift lever is moved to N (for Automatic Transmission) Park/neutral position switch assembly (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
Transmission control ECU assembly (for 1KD-FTV) (Click here)
Cruise control not canceled when clutch pedal is depressed (for Manual Transmission) Clutch switch circuit (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
Control switch does not operate (-SET, +RES, CANCEL not possible) Cruise control switch circuit (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
SET possible at 40 km/h (25 mph) or less, or CANCEL does not operate Hydraulic brake booster assembly (for LHD) [for 1GR-FE, 1KD-FTV, 1GD-FTV] (Click here)
Hydraulic brake booster assembly (for RHD) [for 1GR-FE, 1KD-FTV, 1GD-FTV] (Click here)
Brake actuator assembly (for 2TR-FE) (Click here)
ECM (for 1GR-FE) (Click here)
Front speed sensor LH (Click here)
Front speed sensor RH (Click here)
Rear speed sensor RH (Click here)
Rear speed sensor LH (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
Poor response in ACCEL and RESUME modes Cruise control switch circuit (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
DTC memory is cleared ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
DTC is not output or is output when it should not be TC and CG terminal circuit (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
CRUISE main indicator light does not illuminate Cruise control switch circuit (Click here)
Cruise main indicator circuit (Click here)
Combination meter assembly (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
The cruise control SET indicator light does not come on (SET function operates normally) Cruise SET indicator light circuit (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 2TR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
Combination meter assembly (Click here)