Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › 2017.08–2020.08
RM27T0E _58 Vehicle Interior _053730 DOOR LOCK _0261036 POWER DOOR LOCK CONTROL SYSTEM T

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  PROBLEM SYMPTOMS TABLE  


NOTICE:

w/ Entry and Start System:

If the main body ECU (multiplex network body ECU) is replaced, refer to the Service Bulletin.


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Power Door Lock Control System
Symptom Suspected Area See page
Only Driver Door Lock/Unlock Functions do not Operate Front door lock assembly (Driver side) (Click here)
Harness or connector -
Driver side junction block assembly (Click here)
Only Front Passenger Door Lock/Unlock Functions do not Operate Front door lock assembly (Front passenger side) (Click here)
Harness or connector -
Only Rear Door LH Lock/Unlock Functions do not Operate*1 Rear door lock assembly LH (Click here)
Harness or connector -
Only Rear Door RH Lock/Unlock Functions do not Operate*1 Rear door lock assembly RH (Click here)
Harness or connector -
Only Back Door Lock/Unlock Functions do not Operate Back door lock assembly (Click here)
Harness or connector -
All Doors Lock/Unlock Functions do not Operate*2 Proceed to "Power Source Circuit" (Click here)
All Doors Lock/Unlock Functions do not Operate*3 Harness or connector -
Main body ECU (Multiplex network body ECU) (Click here)
Driver side junction block assembly (Click here)
All doors LOCK/UNLOCK functions do not operate via master switch or door key cylinder Proceed to "All Doors LOCK/UNLOCK Functions do not Operate Via Master Switch, Driver Side Door Key Cylinder" (Click here)
Double Locking Function does not Operate Properly*4 LIN communication system (Click here)
Front door lock assembly LH (Click here)
Front door lock assembly RH (Click here)
Rear door lock assembly LH*1 (Click here)
Rear door lock assembly RH*1 (Click here)
Harness or connector -
Double lock door control relay assembly (Click here)
Main body ECU (Multiplex network body ECU) (Click here)
Speed-sensitive automatic door lock function does not operate (meter /gauge system operates normally)*5 CAN communication system (w/ Central Gateway ECU) (Click here)
CAN communication system (w/o Central Gateway ECU) (Click here)
Main body ECU (Multiplex network body ECU) (Click here)
Driver side junction block assembly (Click here)
Shift-linked automatic door lock/unlock functions do not operate (automatic transmission system operates normally).*6 CAN communication system (w/ Central Gateway ECU) (Click here)
CAN communication system (w/o Central Gateway ECU) (Click here)
Main body ECU (Multiplex network body ECU) (Click here)
ECM (for 1GR-FE) (Click here)
ECM (for 1KD-FTV) (Click here)
ECM (for 1GD-FTV) (Click here)
ECM (for 5L-E) (Click here)
ECM (for 2GTR-FE) (Click here)
Key lock-in prevention function does not operate. Front door courtesy light switch assembly LH (for LHD) (Click here)
Front door courtesy light switch assembly RH (for RHD) (Click here)
Harness or connector -
Driver side junction block assembly (Click here)
Main body ECU (Multiplex network body ECU) (Click here)
Lock operation continues even after doors have been locked*7 Front door lock assembly LH (Click here)
Front door lock assembly RH (Click here)
Rear door lock assembly LH*1 (Click here)
Rear door lock assembly RH*1 (Click here)
Back door lock assembly (Click here)
Harness or connector -
Driver side junction block assembly (Click here)
Main body ECU (Multiplex network body ECU) (Click here)
Collision door lock release function does not operate*2, *5 Proceed to "Collision Door Lock Release Function does not Operate" (Click here)
Collision door lock release function does not operate*3, *5 Harness or connector -
Driver side junction block assembly (Click here)
Main body ECU (Multiplex network body ECU) (Click here)
When returning to the vehicle, although door unlock operation was not performed, doors were in an unlocked state. Main body ECU (Multiplex network body ECU) (Click here)
When returning to the vehicle, although door lock operation was not performed, doors were in a locked state. Main body ECU (Multiplex network body ECU) (Click here)

*1: for 5 Door

*2: w/ Door Control Battery

*3: w/o Door Control Battery

*4: w/ Double Locking System

*5: w/ Speed-sensitive Automatic Door Lock Function

*6: for Automatic Transaxle


HINT:

*7: When the door unlock detection switch detects an unlock position signal after a door lock operation has been performed, a door lock operation will be performed 3 times.