Home › Engine / Hybrid System › 1GD-FTV (ENGINE CONTROL) › ECD SYSTEM › from 2020.08
RM27T0E _51 Engine / Hybrid System _053660 1GD-FTV ENGINE CONTROL _0260475 ECD SYSTEM J

1GD-FTV ENGINE CONTROL  ECD SYSTEM  VC Output Circuit  


DESCRIPTION

The ECM constantly generates a 5 V power source voltage from the battery voltage supplied to the +B (BATT) terminal to operate the microprocessor. The ECM also provides this power source voltage to the sensors through the VC output circuit.

A206916E84
4.375,1.25 6.219,1.594 1.844,0.344 10 false 5 V Constant Voltage Circuit 5.354,2.094 6.365,2.438 1.01,0.344 10 false Microprocessor 1,1.135 2.792,1.365 1.792,0.229 10 false from EFI MAIN NO.1 Fuse 0.906,1.479 2.854,1.76 1.948,0.281 10 false from EFI MAIN NO. 1 Relay 2.906,1.031 3.302,1.219 0.396,0.188 10 false BATT 0.354,2.229 2.615,2.802 2.26,0.573 10 false Throttle Position Sensor, Accelerator Pedal Position Sensor, etc. (sensors which have ICs) 0.365,2.969 2.625,3.438 2.26,0.469 10 false Engine Coolant Temperature Sensor, Intake Air Temperature Sensor, etc. 4.063,3.125 4.323,3.333 0.26,0.208 10 false R 3,1.375 3.281,1.573 0.281,0.198 10 false +B 3.177,2.25 3.542,2.479 0.365,0.229 10 false VC 4.885,3.375 5.333,3.604 0.448,0.229 10 false ECM

When the VC circuit has a short circuit, the CPU in the ECM and sensors that are supplied power through the VC circuit are deactivated because power is not supplied from the VC circuit. When the system is in this condition, it will not start.

WIRING DIAGRAM

·

For the circuit diagram of the ECM power source circuit.

Click hereEngine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM>ECM Power Source Circuit

·

VC Power Source Circuit


A447226E17
6.125,7.094 6.615,7.271 0.49,0.177 10 false ECM 5.75,0.469 6.24,0.646 0.49,0.177 10 false VCP2 5.74,0.865 6.229,1.042 0.49,0.177 10 false EPA2 5.76,1.26 6.25,1.438 0.49,0.177 10 false VPA2 5.76,1.615 6.25,1.792 0.49,0.177 10 false VCPA 5.76,2 6.25,2.177 0.49,0.177 10 false EPA 5.771,2.375 6.26,2.552 0.49,0.177 10 false VPA 5.771,4.219 6.26,4.396 0.49,0.177 10 false EVLU 5.771,4.583 6.26,4.76 0.49,0.177 10 false VCVL 5.781,5 6.271,5.177 0.49,0.177 10 false VLU 5.417,4.813 5.906,4.99 0.49,0.177 10 false 21 5.417,4.417 5.906,4.594 0.49,0.177 10 false 29 5.417,4.01 5.906,4.188 0.49,0.177 10 false 20 5.417,2.188 5.906,2.365 0.49,0.177 10 false 28 5.427,1.813 5.917,1.99 0.49,0.177 10 false 22 5.427,1.438 5.917,1.615 0.49,0.177 10 false 29 5.427,1.073 5.917,1.25 0.49,0.177 10 false 31 5.427,0.698 5.917,0.875 0.49,0.177 10 false 25 5.427,0.323 5.917,0.5 0.49,0.177 10 false 30 1.865,0.5 2.354,0.677 0.49,0.177 10 false VCP2 1.854,0.885 2.344,1.063 0.49,0.177 10 false EPA2 1.854,1.25 2.344,1.427 0.49,0.177 10 false VPA2 1.844,1.625 2.333,1.802 0.49,0.177 10 false VCPA 1.927,1.99 2.417,2.167 0.49,0.177 10 false EPA 1.927,2.365 2.417,2.542 0.49,0.177 10 false VPA 2.042,4.208 2.531,4.385 0.49,0.177 10 false E2 2.021,4.604 2.51,4.781 0.49,0.177 10 false VC 1.938,5.01 2.427,5.188 0.49,0.177 10 false VTA 0.51,5.375 1,5.552 0.49,0.177 10 false r5 0.51,5.583 6.01,5.781 5.5,0.198 10 false Diesel Throttle Body Assembly 0.51,3.021 5.99,3.24 5.479,0.219 10 false Accelerator Pedal Position Sensor (Accelerator Pedal Sensor Assembly) 0.51,2.781 1,2.958 0.49,0.177 10 false A19 2.333,2.125 2.823,2.302 0.49,0.177 10 false 5 2.344,1.76 2.833,1.938 0.49,0.177 10 false 4 2.333,1.396 2.823,1.573 0.49,0.177 10 false 3 2.333,1.021 2.823,1.198 0.49,0.177 10 false 2 2.323,0.656 2.813,0.833 0.49,0.177 10 false 1 2.333,4.344 2.823,4.521 0.49,0.177 10 false 3 2.333,4.74 2.823,4.917 0.49,0.177 10 false 5 5.333,4.99 5.823,5.167 0.49,0.177 10 false C151 5.333,2.365 5.823,2.542 0.49,0.177 10 false G185 5.333,1.99 5.823,2.167 0.49,0.177 10 false G185 5.333,1.615 5.823,1.792 0.49,0.177 10 false G185 5.333,1.25 5.823,1.427 0.49,0.177 10 false G185 5.323,0.875 5.813,1.052 0.49,0.177 10 false G185 5.333,0.5 5.823,0.677 0.49,0.177 10 false G185 2.333,2.51 2.823,2.688 0.49,0.177 10 false 6 2.333,5.135 2.823,5.313 0.49,0.177 10 false 6 5.333,4.594 5.823,4.771 0.49,0.177 10 false C151 5.333,4.198 5.823,4.375 0.49,0.177 10 false C151

A447227E47
0.49,2.594 3.333,2.844 2.844,0.25 10 false Electric EGR Control Valve Assembly*2 0.49,2.406 0.948,2.604 0.458,0.198 10 false C127 1.885,0.573 2.177,0.76 0.292,0.188 10 false E2 1.802,0.958 2.26,1.156 0.458,0.198 10 false VTA 1.875,1.323 2.333,1.521 0.458,0.198 10 false VC 1.865,1.688 2.323,1.885 0.458,0.198 10 false M+ 1.896,2.052 2.354,2.25 0.458,0.198 10 false M- 2.198,0.729 2.49,0.927 0.292,0.198 10 false 1 2.198,1.094 2.49,1.292 0.292,0.198 10 false 2 2.198,1.458 2.49,1.656 0.292,0.198 10 false 3 2.208,1.833 2.5,2.031 0.292,0.198 10 false 4 2.208,2.208 2.5,2.406 0.292,0.198 10 false 5 5.208,0.563 5.667,0.76 0.458,0.198 10 false C151 5.208,0.938 5.667,1.135 0.458,0.198 10 false C151 5.208,1.302 5.667,1.5 0.458,0.198 10 false C151 5.208,1.677 5.667,1.875 0.458,0.198 10 false C151 5.219,2.052 5.677,2.25 0.458,0.198 10 false C151 5.281,0.365 5.74,0.563 0.458,0.198 10 false 24 5.281,0.76 5.74,0.958 0.458,0.198 10 false 25 5.281,1.135 5.74,1.333 0.458,0.198 10 false 31 5.323,1.5 5.781,1.698 0.458,0.198 10 false 6 5.323,1.885 5.781,2.083 0.458,0.198 10 false 7 5.635,0.573 6.177,0.771 0.542,0.198 10 false EEGL 5.635,0.958 6.177,1.156 0.542,0.198 10 false EGRA 5.635,1.323 6.177,1.521 0.542,0.198 10 false VCEG 5.635,1.688 6.177,1.885 0.542,0.198 10 false EGM+ 5.635,2.073 6.177,2.271 0.542,0.198 10 false EGM- 1.917,4.083 2.375,4.281 0.458,0.198 10 false VC 1.854,3.698 2.313,3.896 0.458,0.198 10 false PIM 2,3.302 2.458,3.5 0.458,0.198 10 false E 2.208,3.427 2.5,3.625 0.292,0.198 10 false 1 2.219,3.813 2.51,4.01 0.292,0.198 10 false 2 2.219,4.208 2.51,4.406 0.292,0.198 10 false 3 0.5,4.438 0.958,4.635 0.458,0.198 10 false C83 0.51,4.625 2.844,4.885 2.333,0.26 10 false Manifold Absolute Pressure Sensor 5.292,3.094 5.75,3.292 0.458,0.198 10 false 19 5.292,3.5 5.75,3.698 0.458,0.198 10 false 18 5.292,3.906 5.75,4.104 0.458,0.198 10 false 28 5.208,3.292 5.667,3.49 0.458,0.198 10 false C149 5.208,3.677 5.667,3.875 0.458,0.198 10 false C149 5.219,4.073 5.677,4.271 0.458,0.198 10 false C149 5.635,3.292 6.177,3.49 0.542,0.198 10 false EPIM 5.635,3.698 6.094,3.896 0.458,0.198 10 false PIM 5.646,4.083 6.188,4.281 0.542,0.198 10 false VCPM 5.219,5.313 5.677,5.51 0.458,0.198 10 false C151 5.219,5.708 5.677,5.906 0.458,0.198 10 false C151 5.219,6.104 5.677,6.302 0.458,0.198 10 false C151 5.281,5.135 5.74,5.333 0.458,0.198 10 false 30 5.292,5.531 5.75,5.729 0.458,0.198 10 false 22 5.281,5.938 5.74,6.135 0.458,0.198 10 false 23 2.188,5.448 2.479,5.646 0.292,0.198 10 false 1 2.188,5.844 2.479,6.042 0.292,0.198 10 false 2 2.198,6.24 2.49,6.438 0.292,0.198 10 false 3 1.698,5.323 2.24,5.521 0.542,0.198 10 false VNVC 1.719,5.729 2.26,5.927 0.542,0.198 10 false VNE2 1.76,6.115 2.302,6.313 0.542,0.198 10 false VTA1 0.49,6.469 0.948,6.667 0.458,0.198 10 false C144 0.49,6.656 2.823,6.917 2.333,0.26 10 false Nozzle Vane Position Sensor 5.635,5.323 6.177,5.521 0.542,0.198 10 false VNVC 5.635,5.719 6.177,5.917 0.542,0.198 10 false VNE2 5.635,6.115 6.177,6.313 0.542,0.198 10 false VNA 5.979,9.458 6.521,9.656 0.542,0.198 10 false ECM 0.49,8.719 3.635,9 3.146,0.281 10 false Oil Pressure Sensor Gauge Assembly*1 0.49,8.51 0.948,8.708 0.458,0.198 10 false C123 1.896,7.365 2.438,7.563 0.542,0.198 10 false VC 1.823,7.75 2.365,7.948 0.542,0.198 10 false PEO 1.906,8.146 2.448,8.344 0.542,0.198 10 false E2 2.219,7.479 2.51,7.677 0.292,0.198 10 false 3 2.229,7.865 2.521,8.063 0.292,0.198 10 false 2 2.24,8.271 2.531,8.469 0.292,0.198 10 false 1 5.625,7.365 6.167,7.563 0.542,0.198 10 false VCPE 5.635,7.75 6.177,7.948 0.542,0.198 10 false PEO 5.635,8.156 6.177,8.354 0.542,0.198 10 false EPEO 5.208,8.135 5.667,8.333 0.458,0.198 10 false C150 5.208,7.729 5.667,7.927 0.458,0.198 10 false C150 5.219,7.344 5.677,7.542 0.458,0.198 10 false C150 5.292,7.156 5.75,7.354 0.458,0.198 10 false 34 5.292,7.552 5.75,7.75 0.458,0.198 10 false 26 5.281,7.958 5.74,8.156 0.458,0.198 10 false 35 0.333,9.156 2.938,9.354 2.604,0.198 10 false *1: w/ EGR Cooler 0.333,9.469 2.938,9.667 2.604,0.198 10 false *2: w/ EGR System

A379948E34
6.146,7.406 6.604,7.604 0.458,0.198 10 false ECM 1.844,5.26 2.302,5.458 0.458,0.198 10 false C193 1.854,5.417 4.802,5.604 2.948,0.188 10 false Fuel Pressure Sensor (No. 3 Injector Assembly) 1.885,7.271 4.833,7.458 2.948,0.188 10 false Fuel Pressure Sensor (No. 4 Injector Assembly) 1.865,7.115 2.323,7.313 0.458,0.198 10 false C194 1.813,3.385 2.271,3.583 0.458,0.198 10 false C192 1.76,1.542 2.219,1.74 0.458,0.198 10 false C191 1.823,3.552 4.771,3.74 2.948,0.188 10 false Fuel Pressure Sensor (No. 2 Injector Assembly) 1.781,1.698 4.729,1.885 2.948,0.188 10 false Fuel Pressure Sensor (No. 1 Injector Assembly) 2.802,0.427 3.26,0.625 0.458,0.198 10 false VIJ1 2.813,0.823 3.271,1.021 0.458,0.198 10 false PIJ1 2.813,1.219 3.271,1.417 0.458,0.198 10 false EIJ1 5.781,0.438 6.24,0.635 0.458,0.198 10 false VIJ1 5.781,0.823 6.24,1.021 0.458,0.198 10 false PIJ1 5.771,1.229 6.229,1.427 0.458,0.198 10 false EIJ1 2.802,2.281 3.26,2.479 0.458,0.198 10 false VIJ2 2.802,4.156 3.26,4.354 0.458,0.198 10 false VIJ3 2.792,5.99 3.25,6.188 0.458,0.198 10 false VIJ4 2.802,2.688 3.26,2.885 0.458,0.198 10 false PIJ2 2.802,4.552 3.26,4.75 0.458,0.198 10 false PIJ3 2.792,6.396 3.25,6.594 0.458,0.198 10 false PIJ4 2.802,3.073 3.26,3.271 0.458,0.198 10 false EIJ2 2.802,4.948 3.26,5.146 0.458,0.198 10 false EIJ3 2.792,6.76 3.25,6.958 0.458,0.198 10 false EIJ4 5.781,2.302 6.24,2.5 0.458,0.198 10 false VIJ2 5.792,2.688 6.25,2.885 0.458,0.198 10 false PIJ2 5.792,3.073 6.25,3.271 0.458,0.198 10 false EIJ2 5.792,4.146 6.25,4.344 0.458,0.198 10 false VIJ3 5.792,4.552 6.25,4.75 0.458,0.198 10 false PIJ3 5.792,4.938 6.25,5.135 0.458,0.198 10 false EIJ3 5.792,5.99 6.25,6.188 0.458,0.198 10 false VIJ4 5.781,6.385 6.24,6.583 0.458,0.198 10 false PIJ4 5.792,6.802 6.25,7 0.458,0.198 10 false EIJ4 5.375,0.427 5.833,0.625 0.458,0.198 10 false C151 5.375,2.271 5.833,2.469 0.458,0.198 10 false C152 5.375,0.813 5.833,1.01 0.458,0.198 10 false C151 5.375,1.208 5.833,1.406 0.458,0.198 10 false C151 5.365,2.667 5.823,2.865 0.458,0.198 10 false C152 5.375,3.052 5.833,3.25 0.458,0.198 10 false C152 5.375,4.125 5.833,4.323 0.458,0.198 10 false C152 5.375,4.521 5.833,4.719 0.458,0.198 10 false C152 5.375,4.917 5.833,5.115 0.458,0.198 10 false C152 5.365,5.979 5.823,6.177 0.458,0.198 10 false C152 5.365,6.365 5.823,6.563 0.458,0.198 10 false C152 5.375,6.771 5.833,6.969 0.458,0.198 10 false C152 3.177,0.552 3.417,0.76 0.24,0.208 10 false 2 3.167,2.417 3.406,2.625 0.24,0.208 10 false 2 3.167,0.948 3.406,1.156 0.24,0.208 10 false 4 3.167,1.354 3.406,1.563 0.24,0.208 10 false 1 3.156,4.271 3.396,4.479 0.24,0.208 10 false 2 3.156,6.115 3.396,6.323 0.24,0.208 10 false 2 3.177,2.802 3.417,3.01 0.24,0.208 10 false 4 3.167,3.208 3.406,3.417 0.24,0.208 10 false 1 3.156,4.677 3.396,4.885 0.24,0.208 10 false 4 3.156,6.51 3.396,6.719 0.24,0.208 10 false 4 3.156,5.063 3.396,5.271 0.24,0.208 10 false 1 3.156,6.938 3.396,7.146 0.24,0.208 10 false 1 5.458,0.24 5.698,0.448 0.24,0.208 10 false 28 5.448,0.646 5.688,0.854 0.24,0.208 10 false 18 5.448,1.052 5.688,1.26 0.24,0.208 10 false 19 5.448,2.094 5.688,2.302 0.24,0.208 10 false 24 5.448,2.49 5.688,2.698 0.24,0.208 10 false 29 5.458,2.896 5.698,3.104 0.24,0.208 10 false 30 5.458,3.958 5.698,4.167 0.24,0.208 10 false 33 5.448,4.354 5.688,4.563 0.24,0.208 10 false 26 5.458,4.75 5.698,4.958 0.24,0.208 10 false 32 5.458,5.792 5.698,6 0.24,0.208 10 false 22 5.448,6.198 5.688,6.406 0.24,0.208 10 false 23 5.458,6.604 5.698,6.813 0.24,0.208 10 false 21 4.708,0.24 4.948,0.469 0.24,0.229 10 false * 4.698,2.094 4.938,2.323 0.24,0.229 10 false * 4.708,3.969 4.948,4.198 0.24,0.229 10 false * 4.698,5.813 4.938,6.042 0.24,0.229 10 false * 0.125,7.375 1.052,7.563 0.927,0.188 10 false *: Shielded

A445188E18
1.781,0.781 2.094,0.979 0.313,0.198 10 false FG 1.729,1.146 2.104,1.344 0.375,0.198 10 false E2G 1.813,1.51 2.094,1.708 0.281,0.198 10 false 5V 1.708,1.896 2.125,2.094 0.417,0.198 10 false THA 0.344,2.375 0.958,2.573 0.615,0.198 10 false C172 0.344,2.573 2.656,2.781 2.313,0.208 10 false Mass Air Flow Meter Sub-assembly 0.448,4.833 2.76,5.042 2.313,0.208 10 false Crankshaft Position Sensor 0.458,4.646 0.771,4.844 0.313,0.198 10 false r7 0.417,7.198 2.729,7.406 2.313,0.208 10 false Camshaft Position Sensor 0.427,7 1.042,7.198 0.615,0.198 10 false C170 1.74,3.344 2.198,3.542 0.458,0.198 10 false NE+ 1.74,3.74 2.198,3.938 0.458,0.198 10 false NE- 1.771,4.167 2.229,4.365 0.458,0.198 10 false VC 1.656,5.719 2.115,5.917 0.458,0.198 10 false G22+ 1.667,6.115 2.125,6.313 0.458,0.198 10 false G22- 1.781,6.521 2.24,6.719 0.458,0.198 10 false VC 2.135,0.885 2.448,1.083 0.313,0.198 10 false 1 2.135,1.24 2.448,1.438 0.313,0.198 10 false 2 2.135,1.615 2.448,1.813 0.313,0.198 10 false 3 2.135,2 2.448,2.198 0.313,0.198 10 false 4 2.125,3.479 2.438,3.677 0.313,0.198 10 false 1 2.135,3.875 2.448,4.073 0.313,0.198 10 false 2 2.135,4.271 2.448,4.469 0.313,0.198 10 false 3 2.115,5.833 2.427,6.031 0.313,0.198 10 false 1 2.125,6.229 2.438,6.427 0.313,0.198 10 false 2 2.115,6.625 2.427,6.823 0.313,0.198 10 false 3 5.229,0.573 5.542,0.771 0.313,0.198 10 false 31 5.219,0.948 5.531,1.146 0.313,0.198 10 false 29 5.208,1.323 5.521,1.521 0.313,0.198 10 false 30 5.219,1.698 5.531,1.896 0.313,0.198 10 false 28 5.24,3.167 5.552,3.365 0.313,0.198 10 false 28 5.229,3.563 5.542,3.76 0.313,0.198 10 false 19 5.24,3.969 5.552,4.167 0.313,0.198 10 false 20 5.219,5.51 5.531,5.719 0.313,0.208 10 false 27 5.208,5.927 5.521,6.135 0.313,0.208 10 false 18 5.208,6.323 5.521,6.531 0.313,0.208 10 false 17 5.125,0.76 5.5,0.948 0.375,0.188 10 false C150 5.135,1.135 5.51,1.323 0.375,0.188 10 false C150 5.125,1.51 5.5,1.698 0.375,0.188 10 false C150 5.135,1.885 5.51,2.073 0.375,0.188 10 false C150 5.146,3.365 5.521,3.552 0.375,0.188 10 false C152 5.146,3.76 5.521,3.948 0.375,0.188 10 false C152 5.146,4.156 5.521,4.344 0.375,0.188 10 false C152 5.135,5.719 5.51,5.906 0.375,0.188 10 false C152 5.125,6.115 5.5,6.302 0.375,0.188 10 false C152 5.115,6.51 5.49,6.698 0.375,0.188 10 false C152 5.573,0.76 5.885,0.958 0.313,0.198 10 false VG 5.573,1.135 5.885,1.333 0.313,0.198 10 false EVG 5.563,1.531 6.083,1.75 0.521,0.219 10 false VCVG 5.563,1.885 6.083,2.104 0.521,0.219 10 false THA 5.573,3.354 6.031,3.552 0.458,0.198 10 false NE+ 5.583,3.74 6.042,3.938 0.458,0.198 10 false NE- 5.583,4.135 6.042,4.333 0.458,0.198 10 false VCNE 5.573,5.708 6.031,5.906 0.458,0.198 10 false G2+ 5.563,6.104 6.021,6.302 0.458,0.198 10 false G2- 5.594,6.51 6.052,6.708 0.458,0.198 10 false VCG

CAUTION / NOTICE / HINT

NOTICE:
·

Check the fuses for circuits related to this system before performing the following inspection procedure.

·

After replacing the ECM, the new ECM needs registration (Click here Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION) and initialization (Click here Engine / Hybrid System>1GD-FTV (ENGINE CONTROL)>ECD SYSTEM>INITIALIZATION).



PROCEDURE

1.CHECK CONNECTION BETWEEN GTS AND ECM
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is not possible A
Communication is possible B



A

2.CHECK TERMINAL VOLTAGE (POWER SOURCE OF ECM)

B

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

2.CHECK TERMINAL VOLTAGE (POWER SOURCE OF ECM)
A346513C29
2.281,0.354 2.792,0.646 0.51,0.292 2.031,1.667 2.156,1.667 2.156,1.667 2.479,1 true 2.25,1.896 2.344,1.896 2.344,1.896 2.552,1 true 2.833,1.667 2.729,1.667 2.729,1.667 2.604,1 true 2.354,0.396 2.844,0.604 0.49,0.208 10 false G184 1.615,1.583 2.083,1.802 0.469,0.219 10 false 4 (+B) 1.771,1.813 2.292,2.021 0.521,0.208 10 false 3 (+B2) 2.875,1.604 3.385,1.844 0.51,0.24 10 false 2 (+B3) 0.073,0.063 0.385,0.26 0.313,0.198 10 false *a
*a Component with harness connected
(to ECM)


a.

Turn the ignition switch to ON.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
G184-4 (+B) - Body ground Ignition switch ON 11 to 14 V
G184-3 (+B2) - Body ground Ignition switch ON 11 to 14 V
G184-2 (+B3) - Body ground Ignition switch ON 11 to 14 V


HINT:

If the result is not as specified, since current is not flowing to the +B, +B2 and +B3 terminals of the ECM, the system may not be started.



Result:
Proceed to
OK
NG



OK

3.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR)

NG

3.CHECK CONNECTION BETWEEN GTS AND ECM (CAMSHAFT POSITION SENSOR)
a.

Disconnect the camshaft position sensor connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.


Result:
Result Proceed to
Communication is possible A
Communication is not possible B



d.

Reconnect the camshaft position sensor connector.



A

B

4.CHECK CONNECTION BETWEEN GTS AND ECM (MANIFOLD ABSOLUTE PRESSURE SENSOR)
4.CHECK CONNECTION BETWEEN GTS AND ECM (MANIFOLD ABSOLUTE PRESSURE SENSOR)
a.

Disconnect the manifold absolute pressure sensor connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the manifold absolute pressure sensor connector.



A

B

5.CHECK CONNECTION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY)
5.CHECK CONNECTION BETWEEN GTS AND ECM (MASS AIR FLOW METER SUB-ASSEMBLY)
a.

Disconnect the mass air flow meter sub-assembly connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the mass air flow meter sub-assembly connector.



A

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY

B

6.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
6.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
a.

Disconnect the No. 1 injector assembly connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the No. 1 injector assembly connector.



A

REPLACE NO. 1 INJECTOR ASSEMBLY

B

7.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
7.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
a.

Disconnect the No. 2 injector assembly connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the No. 2 injector assembly connector.



A

REPLACE NO. 2 INJECTOR ASSEMBLY

B

8.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
8.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
a.

Disconnect the No. 3 injector assembly connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the No. 3 injector assembly connector.



A

REPLACE NO. 3 INJECTOR ASSEMBLY

B

9.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
9.CHECK CONNECTION BETWEEN GTS AND ECM (FUEL PRESSURE SENSOR)
a.

Disconnect the No. 4 injector assembly connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible (w/ EGR System) B
Communication is not possible (w/o EGR System) C


d.

Reconnect the No. 4 injector assembly connector.



A

REPLACE NO. 4 INJECTOR ASSEMBLY

B

10.CHECK CONNECTION BETWEEN GTS AND ECM (ELECTRIC EGR CONTROL VALVE ASSEMBLY)

C

11.CHECK CONNECTION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)
10.CHECK CONNECTION BETWEEN GTS AND ECM (ELECTRIC EGR CONTROL VALVE ASSEMBLY)
a.

Disconnect the electric EGR control valve assembly connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the electric EGR control valve assembly connector.



A

REPLACE ELECTRIC EGR CONTROL VALVE ASSEMBLY

B

11.CHECK CONNECTION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)
11.CHECK CONNECTION BETWEEN GTS AND ECM (ACCELERATOR PEDAL POSITION SENSOR)
a.

Disconnect the accelerator pedal position sensor connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the accelerator pedal position sensor connector.



A

REPLACE ACCELERATOR PEDAL SENSOR ASSEMBLY

B

12.CHECK CONNECTION BETWEEN GTS AND ECM (DIESEL THROTTLE BODY ASSEMBLY)
12.CHECK CONNECTION BETWEEN GTS AND ECM (DIESEL THROTTLE BODY ASSEMBLY)
a.

Disconnect the diesel throttle body assembly connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the diesel throttle body assembly connector.



A

B

13.CHECK CONNECTION BETWEEN GTS AND ECM (NOZZLE VANE POSITION SENSOR)
13.CHECK CONNECTION BETWEEN GTS AND ECM (NOZZLE VANE POSITION SENSOR)
a.

Disconnect the nozzle vane position sensor connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible (w/ EGR Cooler) B
Communication is not possible (w/o EGR Cooler) C


d.

Reconnect the nozzle vane position sensor connector.



A

B

14.CHECK CONNECTION BETWEEN GTS AND ECM (OIL PRESSURE SENDER GAUGE ASSEMBLY)

C

15.CHECK CONNECTION BETWEEN GTS AND ECM (CRANKSHAFT POSITION SENSOR)
14.CHECK CONNECTION BETWEEN GTS AND ECM (OIL PRESSURE SENDER GAUGE ASSEMBLY)
a.

Disconnect the oil pressure sender gauge assembly connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the oil pressure sender gauge assembly connector.



A

REPLACE OIL PRESSURE SENDER GAUGE ASSEMBLY

B

15.CHECK CONNECTION BETWEEN GTS AND ECM (CRANKSHAFT POSITION SENSOR)
15.CHECK CONNECTION BETWEEN GTS AND ECM (CRANKSHAFT POSITION SENSOR)
a.

Disconnect the crankshaft position sensor connector.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Check the communication between the GTS and ECM.

HINT:

It can be checked using the "Engine" item of the Data List.



Result:
Result Proceed to
Communication is possible A
Communication is not possible B


d.

Reconnect the crankshaft position sensor connector.



A

B

16.CHECK HARNESS AND CONNECTOR
16.CHECK HARNESS AND CONNECTOR
a.

Disconnect the camshaft position sensor connector.


b.

Disconnect the manifold absolute pressure sensor connector.


c.

Disconnect the mass air flow meter sub-assembly connector.


d.

Disconnect the No. 1 injector assembly connector.


e.

Disconnect the No. 2 injector assembly connector.


f.

Disconnect the No. 3 injector assembly connector.


g.

Disconnect the No. 4 injector assembly connector.


h.

Disconnect the electric EGR control valve assembly connector (w/ EGR System).


i.

Disconnect the accelerator pedal sensor assembly connector.


j.

Disconnect the diesel throttle body assembly connector.


k.

Disconnect the oil pressure sender gauge assembly connector (w/ EGR Cooler).


l.

Disconnect the crankshaft position sensor connector.


m.

Disconnect the nozzle vane position sensor connector.


n.

Disconnect the ECM connectors.


o.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
C152-17 (VCG) - Body ground and other terminals Always 10 kΩ or higher
C149-28 (VCPM) - Body ground and other terminals Always 10 kΩ or higher
C150-30 (VCVG) - Body ground and other terminals Always 10 kΩ or higher
C151-28 (VIJ1) - Body ground and other terminals Always 10 kΩ or higher
C152-24 (VIJ2) - Body ground and other terminals Always 10 kΩ or higher
C152-33 (VIJ3) - Body ground and other terminals Always 10 kΩ or higher
C152-22 (VIJ4) - Body ground and other terminals Always 10 kΩ or higher
C151-31 (VCEG)*1 - Body ground and other terminals Always 10 kΩ or higher
G185-29 (VCPA) - Body ground and other terminals Always 10 kΩ or higher
G185-30 (VCP2) - Body ground and other terminals Always 10 kΩ or higher
C151-29 (VCVL) - Body ground and other terminals Always 10 kΩ or higher
C150-34 (VCPE)*2 - Body ground and other terminals Always 10 kΩ or higher
C152-20 (VCNE) - Body ground and other terminals Always 10 kΩ or higher
C151-30 (VNVC) - Body ground and other terminals Always 10 kΩ or higher
G184-4 (+B) - Body ground and other terminals Always 10 kΩ or higher
G184-3 (+B2) - Body ground and other terminals Always 10 kΩ or higher
G184-2 (+B3) - Body ground and other terminals Always 10 kΩ or higher


·

*1: w/ EGR System

·

*2: w/ EGR Cooler



p.

Reconnect the nozzle vane position sensor connector.


q.

Reconnect the crankshaft position sensor connector.


r.

Reconnect the oil pressure sender gauge assembly connector (w/ EGR Cooler).


s.

Reconnect the diesel throttle body assembly connector.


t.

Reconnect the accelerator pedal sensor assembly connector.


u.

Reconnect the electric EGR control valve assembly connector (w/ EGR System).


v.

Reconnect the No. 4 injector assembly connector.


w.

Reconnect the No. 3 injector assembly connector.


x.

Reconnect the No. 2 injector assembly connector.


y.

Reconnect the No. 1 injector assembly connector.


z.

Reconnect the mass air flow meter sub-assembly connector.


aa.

Reconnect the manifold absolute pressure sensor connector.


ab.

Reconnect the camshaft position sensor connector.


ac.

Reconnect the ECM connectors.


Result:
Proceed to
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR