1. SUSPENSION FLUID PRESSURE RELEASE
17430
2.REMOVE TAILPIPE ASSEMBLY
for 1GR-FE:
Remove the tailpipe (See page Engine / Hybrid System>1GR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 1UR-FE:
Remove the tailpipe (See page Engine / Hybrid System>1UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 3UR-FE:
Remove the tailpipe (See page Engine / Hybrid System>3UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 1VD-FTV:
Remove the tailpipe (See page Engine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE(w/o DPF)>REMOVAL).
17420
3.REMOVE CENTER EXHAUST PIPE ASSEMBLY
for 1GR-FE:
Remove the center exhaust pipe (See page Engine / Hybrid System>1GR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 1UR-FE:
Remove the center exhaust pipe (See page Engine / Hybrid System>1UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 3UR-FE:
Remove the center exhaust pipe (See page Engine / Hybrid System>3UR-FE (INTAKE / EXHAUST)>EXHAUST PIPE>REMOVAL).
for 1VD-FTV:
Remove the center exhaust pipe (See page Engine / Hybrid System>1VD-FTV (INTAKE / EXHAUST)>EXHAUST PIPE(w/o DPF)>REMOVAL).
489D5
4.REMOVE HEIGHT CONTROL UNIT INSULATOR
5.DISCHARGE SUSPENSION FLUID PRESSURE
48987
6.REMOVE NO. 7 HEIGHT CONTROL TUBE
49130F
7.REMOVE SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY
47373B
8.REMOVE CLAMP
48986
9.REMOVE NO. 6 HEIGHT CONTROL TUBE
48996D
10.REMOVE NO. 6 HEIGHT CONTROL TUBE LH
48995E
11.REMOVE NO. 5 HEIGHT CONTROL TUBE LH
48985
12.REMOVE NO. 5 HEIGHT CONTROL TUBE
48997
13.DISCONNECT REAR NO. 4 HEIGHT CONTROL TUBE
48940
14.REMOVE NO. 1 HEIGHT CONTROL VALVE ASSEMBLY
48983
15.DISCONNECT NO. 3 HEIGHT CONTROL TUBE
Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.
48994F
16.DISCONNECT NO. 4 HEIGHT CONTROL TUBE LH
Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.
48984
17.DISCONNECT NO. 4 HEIGHT CONTROL TUBE
Remove the union bolt and gasket, then disconnect the No. 4 height control tube from the control cylinder.
48993
18.DISCONNECT NO. 3 HEIGHT CONTROL TUBE LH
Remove the union bolt and gasket, then disconnect the No. 3 height control tube from the control cylinder.
489D0
19.REMOVE HEIGHT CONTROL BRACKET WITH CYLINDER ASSEMBLY
Remove the 2 bolts and bracket with cylinder.
49081
20.REMOVE CENTER SUSPENSION CONTROL CYLINDER SUB-ASSEMBLY
Remove the 2 nuts and cylinder from the bracket.