Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
46420
1.INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY
Install the No. 2 parking brake cable clamp.
Install the No. 2 parking brake cable with the 6 bolts.
Install the fuel tank (See page Engine / Hybrid System>1GR-FE (FUEL)>FUEL TANK>INSTALLATION).
Attach the claws of the No. 2 parking brake cable.
Connect the No. 2 parking brake cable to the No. 1 parking brake pull rod.
46430
2.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
Install the No. 3 parking brake cable clamp.
Install the No. 3 parking brake cable with the 6 bolts.
Attach the claws of the No. 3 parking brake cable.
Connect the No. 3 parking brake cable to the No. 1 parking brake pull rod.
46430
3.CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
46602
4.INSTALL PARKING BRAKE SHOE LEVER LH
46590
5.INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY LH
46580
6.INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY LH
7.INSTALL PARKING BRAKE SHOE RETURN SPRING
8.CHECK PARKING BRAKE INSTALLATION
42431
9.INSTALL REAR DISC
10.CONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH
Connect the rear disc brake cylinder with 2 new bolts.
Do not twist the brake hose.
Make sure that the bolts are free from damage and foreign matter.
Do not overtighten the bolts.
491B2
11.INSTALL REAR NO. 2 SUSPENSION CONTROL ACCUMULATOR BRACKET
489B0
12.INSTALL HEIGHT CONTROL UNIT PROTECTOR PIPE
13.ADJUST PARKING BRAKE
14.INSTALL REAR WHEEL
58812A
15.INSTALL LOWER CONSOLE BOX (w/o Console Box Lid)
88520
16.INSTALL COOLING BOX ASSEMBLY (w/ Cool Box)
58901A
17.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)